Install Instructions

11
Appliance Preparations
SECTION III - Appliance Preparations
Shipping and Handling Instructions
To avoid damage to gas fitting and piping at
bottom of appliance, appliance must be
shipped with rear or back of appliance
(longest box length) laying down flat.
The CHALLENGER is generally easier to
handle and maneuver once removed from the
shipping carton.
To remove the shipping carton:
Use care not to lift the appliance from
piping or damage can occur. Use care
not to drop or bump the appliance as
damage to the appliance may result.
1. Remove any shipping straps and the top
shipping carton.
2. Carefully lift the appliance out of the carton.
3. Discard all packing materials.
Wall Mounting Installation
Prior to mounting appliance install pip-
ing support bracket according to
instructions on page 13.
The CHALLENGER should be wall mounted
using the bracket provided with the appliance
and is not designed for floor installation. If
floor installation is required an optional floor
stand part number PSSTND04 is available
through Triangle Tube. Appliance is not to be
installed on carpeting.
The wall used for mounting the CHAL-
LENGER must be vertically plumb and
capable of supporting a minimum 110
pounds [50 kg]. Failure to comply with
these requirements could result in per-
sonal injury, death or substantial prop-
erty damage.
NOTICE
CAUTION
NOTICE
WARNING
Fig. 1: Optional Floor Stand Assembly,
Part Number: PSSTND04