Instinct Installation Manual

CHAPTER 9 - CTRLMAX OPERATION
54
9.14.1 Information Items
Information Item Description
Boiler Status
Displays the current operating state of the INSTINCT. This is the same as the sta-
tus line on the home screen.
Heating Call Displays if a central heating call is present.
DHW Call Displays if a domestic hot water call is present.
Boiler Firing Rate Displays the current firing rate of the INSTINCT.
Ionization C ur r en t Displays the cur r ent flame ionization cur r ent fr om the ig nit or .
Boiler Setpoint Displays the current setpoint of the INSTINCT.
Supply Temp. Displays the current supply temperature of the INSTINCT.
Return Temp. Displays the current return temperature to the INSTINCT.
Boiler Flue Temp. Displays the current flue temperature of the INSTINCT.
Outdoor Temp. Displays the current outdoor temperature.
DHW Storage Temp.
Displays the current DHW storage temperature when Indirect Water Heater Sen-
sor PSRKIT22 is installed.
External Modulation Signal
Displays the current external modulation signal being received from an external
controller.
Pressure Displays the current system water pressure.
CH Ignitions
Displays the number of central heating ignitions since the unit was installed. This
count er incr eases in incr ements of t w enty .
CH Runtime
Displays the number of hours the INSTINCT has run for a central heating call since
the unit was installed.
DHW Ignitions
Displays the number of domestic hot water ignitions since the unit was installed.
T his count er incr eases in incr ements of t w enty .
DHW Flowrate Displays the Domestic Hot Water flow rate
DHW Runtime
Displays the number of hours the INSTINCT has run for a domestic hot water call
since the unit was installed.
Mix Zone Temperature Displays the current low temperature mix zone temperature.
CHAPTER 9