Operation Manual

4. S-Video Output

Analog video output for connecting Home Theatre systems through matching input jacks.

5. Analog Video Output

Analog video output for connecting Home Theater systems or monitors. The available video

output signal format is "CVBS"

6. Digital Audio Output (Coaxial)

Dolby Digital and Linear PCM Stereo output for digital input of a HiFi or A/V system with

integrated digital decoder.

7. Analog Audio Output (Stereo)

Audio Stereo L/ R signal for connecting your TV, HiFi or Home Theatre system.

8. SCART Connector (TV)

For connection of all audio and video signals of this digital receiver to the TV set.The video signal

is output as RGB or "CVBS" (F-BAS) respectively.

9. SCART Connector (VCR)

For connection of all audio and video signals of this digital receiver to a video cassette recorder

(VCR).The video signal is output as "CVBS" (F-BAS) respectively

10. LNB Input (IF INPUT)

Connect your satellite antenna system (LNB, multi-switch) to this jack.

11. LNB Loop-Through Output (IF OUTPUT)

If you have another analogue or digital satellite receiver and you wish to use the same LNB, then

you can connect it to this "LNB loop-through" output jack.

12. Mechanical Power Switch

Please note that the STB will be isolated completely from the 230V mains supply only after setting

this mechanical power switch to OFF.

CAUTION:

Do not mix up IF INPUT and IF OUTPUT jacks when connecting your satellite antenna!

DVB S1