Operation Manual

7.6 Parental Lock

This allows you to lock particular channels or the receiver

itself. For example, you can prevent your children from

accessing adult programs using this function.

Select "Parental Lock Manager" from the Main Menu.

When the "Enter Password" message appears, enter the

password.

The factory default user password is '0000'

Select "Channel Lock" when you wish to lock specific

channels only. (if someone switches to a locked channel,

the password screen will appear.)

Select "Access Lock" when you wish to lock the receiver

when it is powered on. The password will be required

before starting up.

Select " Menu LocK" When you wish to lock the Menu when you don`t want to change in

initial menu.

7.7 Change Password

The factory default user password is '0000'. For improved security we recommend to create an

individual password, if needed.

Select "Parental Lock Manager" from the Main Menu.

Select "Change Password"

Follow the instructions on the screen.

If you have lost your individual password you will need a master password which will unlock

your system again. Please contact your dealer or your nearest service station.

7.5 Timer Reservation

Use this function to make a timer recording on a connected

VCR or switch ON /OFF this receiver at preset times.

You can book up to 10 timer events.

Press the TIMER button on the remote control.

The message "Please set user time first" appears,

followed by the "User Time Setting" screen. Set user time

according to the current time. If the user time is already

set, this step will be skipped.

When the "Recording List" screen appears select a blank

position and then press OK.

The screen "Recording Setting" appears. To record an

event, enter information such as, channel, start time, end

time, event type (Once, Daily, Weekly), etc. When the

settings are completed, select "Recording" and then

press the OK button.

You can check the timer recording settings from the

Recording List.

Note:

A message appears one minute before the recording start time, asking whether or not to proceed

with the recording. To proceed with OK or exit with CANCEL.

DVB S1