TRIAX ST-HD527 CI Digital Combo set-top box 305013 / 305014
Copyright Not to be copied, used or translated in part or whole without prior consent in writing except approval of ownership of copyright and copyright law. Warranty This warranty does not cover parts which may become defective due to misuse of the information contained in this manual. Trademark Acknowledgment and license notice Trade Mark of the DVB Digital Video Broadcasting Project (1991 to 1996) Declaration of Conformity No. 4296, 22nd August 2006 Manufactured under license from Dolby Laboratories.
Warning! Important Safety Instruction CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER(OR BACK).NO USER SERVICEABLE PARTS INSIDE, REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Safety precautions: The receiver has been manufactured in accordance with international safety standards .For your own safety you should read the notes on safety precautions carefully, and take note of them ,before operating your new receiver .
Manufacturer Dear Customer, Should you require technical assistance and in the event that your expert dealer is unable to help you, please contact us.
Table of Contents 1. General Information…………………………………………………………………………… 7 1.1 Main Features……………………………………………………………………………… 7 1.2 For Your Safety…………………………………………………………………………… 7 1.3 Unpacking…………………………………………………………………………………… 8 1.4 General Operation of the TRIAX ST-HD527CI………………………………………… 8 1.5 RCU………………………………………………………………………………………… 9 1.6 Front Panel………………………………………………………………………………… 10 1.7 Rear Panel (connections)………………………………………………………………… 10 2. First time installation ....................................
8. Timer…………………………………………………………………………………………… 22 8.1 Time Adjust………………………………………………………………………………… 22 8.2 Time Reservation………………………………………………………………………… 22 9.
General Information The TRIAX ST-HD527CI allows you to view a variety of satellite programs. This user’s guide covers the installation of the TRIAX ST-HD527CI and the necessary steps to operate various features. It also explains special features available only in this TRIAX ST-HD527CI in detail, and will allow you to take full advantage of these features. 1.1 Main Features • Support MPEG-1 ISO/IEC 11172-2, MPEG-2 MP@ML and MP@HL, ISO/IEC 13818-2, MPEG-4 AVC MP@L4 and HP@L4.
1.3 Unpacking Unpack the TRIAX ST-HD527CI and check to make sure that all of the following items are included in the packaging. • 1 x Remote Control Unit (RCU) • 1 x User’s Guide 1.4 General Operation of the TRIAX ST-HD527CI Throughout this manual you will notice that the everyday operation of your TRIAX ST-HD527CI is based on a series of user friendly on screen display and menus.
1.
Front Panel Power ,Menu, Enter, PR+/- ,Vol +/-,Exit Figure 2: Front Panel 1.
2. First Time Installation: 2.0 General Settings Plug in your Set Top Box. The “Easy Installation” menu is shown. Select the desired language with cursors and Check all settings are as you want-all settings will change to the most used setup For the chosen OSD language. Once you have correctly connected the Set Top Box.
2.2 Satellite 3. Menu Information Once you have installed and connected the cables of the TRIAX ST-HD527CI, the menu will is displayed. This Main Page consists of 5 main pages as shown below. • Channel Manager • Timer • User Installation • Receiver Information • Access Control Receiver During the installation the OK key confirms a selection and ey shows the Drop Down List Box. You can also use the numeric keys on the RCU to enter a numeric value.
3.1 User Installation This menu consists of 6 sub-menus as shown below. • Antenna Setup • Channel Search • System Setting • Air Download • Parental Lock • Factory Default 3.1.1 Antenna Setup – Fixed 1. Antenna : You can select a maximum of 15 antennas with the combination switches. 2. Type : Fix 3. Satellite : Select first satellite you want. 4. LNB Type :(Normal,Universal,LNBF) Select your LNB type. If you have universal LNB, select Universal. 5. LNB Freq.
3.2 Channel Search Page 3.3 Channel Search 1. Antenna : Select your antenna number. 2. Satellite : Select desired satellite using key You can see the information of the selected satellite on the right side. You can edit certain preprogrammed data such as Transponder, Frequency, Symbol Rate, Polarization and 22 KHz directly. 3. Position : Disable 4. Transponder : Select desired transponder using keys. Pressing the OK key will display a Down List Box which also lets you select the desired transponder. 5.
• Search Network: Search all channels at once on all satellites. TRIAX ST-HD527CI will automatically search channels for TV and Radio. During this procedure you can see a list of the previously searched channels in the Searched List Box on the screen. 3.4 System Setting The System Setting menu allows you to set items depending on your environment. 1. OSD Language : Lets you select the desired language. 2.
7. Sort Channel By LCN:YES or NO 8. Partition number Usually you get the information real time from the satellite automatically but sometimes they transmit wrong information. In that case, you can adjust the real time using this function. 3.5 Parental Lock This function allows you to lock the channel with a password in order to prevent children from accessing the channel. You can also protect your installed data and information using the Install Lock. • How to change the Password 1.
4. Common Interface TRIAX ST-HD527CI makes you enjoy various scrambled channels encrypted by Viaccess, Nagravision, Irdeto, Conax, Cryptoworks and SECA. 4.1 Preparing To be able to receive scrambled digital satellite channels you need a Smartcard and a Common Interface CA (Conditional Access) module from the Service Provider of your choice. The Smartcard and the CA module may also provide access to special menus not described in this manual. If so, please follow the instructions from the Service Provider.
5. General Viewing Function The following describes the basic functions of your TRIAX ST-HD527CI while watching satellite TV or listening to satellite radio. TRIAX ST-HD527CI enables you to watch various scrambled channels by inserting the CAMS and Smart card. While watching, the current channel information will be shown on the bottom of the screen if you press the INFO button on the RCU. 5.
5.6 Volume & Audio Control 1. Volume Control To increase or decrease volume, use Key on the RCU or VOL< > on the front panel. Note: TRIAX ST-HD527CI has 11 volume levels and this can be controlled from the volume level of your TV. 2. Mute To mute the sound, press once again. button on the RCU. To bring back the normal sound, press this key 3.
6.1 Channel Manager Channel manager consists of TV channel and Radio channel. Note: Since the usage of Radio Channel is same as that of TV channel, in this manual only TV Channel manager is explained. On the left side of the TV channel menu, you can see the channel list. On the right side, you can watch the current channel in small Picture in Graphic (PIG) mode (1/9 size of the normal mode). You can also see channel information under the PIG screen.
Check whether the channel number has changed on the channel list. 6.4 Lock In the TV channel manager page, press Parental Lock key (blue color key) on the RCU. This Parental Lock command allows you to lock the channel. First select the channel, which you want to lock, and press OK key. Then this will be marked beside the selected channel name. Note: To perform this function, you should set up the Lock in advance. 6.
8. Timer You can adjust the real time as well as you can program the timer in various ways. This function is one of the strong points of TRIAX ST-HD527CI Time Adjust Usually you get the information real time from the satellite automatically but sometimes they transmit wrong information. In that case, you can adjust the real time using this function. 8.2 Time Reservation Timer can be activated by “Turn on time” and/or “Turn Off the time” Option. Timer allows you to program the various timer functions.
9.
09-2009-C www.triax.
