TRIAX STR 333 Digital Combo Receiver PREMIUM DUAL PVR Use Manual N1_ENGLISH 104165
General Safety Cautions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : To reduce the risk of electrical shock, do not remove the cover. No user serviceable parts inside. 5HIHU DQ\ VHUYLFLQJ WR TXDOL¿HG 6HUYLFH SHUVRQQHO Read this manual carefully before using the product. The cautions described below contain important information about safety, and are categorized into: Danger, Warning and Notice.
Cautions Warning If the product is mishandled, the user might receive a serious or minor injury. Damage or loss to the user’s property might also result. • The product must not be exposed to water or liquid. If the apparatus is exposed to drips or splashes, it might cause a problem that cannot be repaired. • Do not repair, disassemble or modify this apparatus yourself. It might be seriously damaged, possibly beyond repair.
Contents General Safety.................................................................................................. 2 1. Functions and Installation ........................................................................ 5 1.1 Remote Control Unit................................................................. 5 1.2 Front Panel................................................................................. 6 1.3 Rear Panel .............................................................................
1. Functions and Installation 1.1 Remote Control Unit 1 3 5 2 4 8 7 12 11 15 6 9 10 13 14 16 20 17 19 22 25 27 28 30 31 32 18 21 23 24 26 29 34 33 35 36 37 1. STAND BY To switch between operation and stand by mode. To select the sound mode. (Mono, Left, 2. A.L/R Right, Stereo) To display the reserved list. (Option) To select the audio language. 3. A/LANG 4. PIP ON/OFF To turn the PIP screen on/off. CH To change the PIP screen channel. If you press the button, the PIP Channel List will be shown.
1.2 Front Panel 1 2 3 3 4 5 5 6 7 8 5. CH -/+( Program Ÿ/ź) Channel -/+ or select item of sub-menu. 6. EXIT Exit from parameter and cancel selected function. 7. Smartcard Slot 1 Slot for smart card. 8. Cam Slot (Option) 2 Slot for Common Interface CAM with smart card. 1. STAND BY(POWER) Switch the receiver power "ON" or "OFF". 2. MENU To see main menu. 3. VOL -/+ To turn the volume -/+ or select a sub-menu item. 4. OK To select a program, a highlighted line or parameter value. 1.
1.4 CAM(Conditional Access Module) and Smart Card (Option) Caution Please do not plug in the main power supply cord until you have finished all of the connections! Although some TV and radio channels are free to view, you must subscribe to most TV and radio/music channels and a Conditional Access component is required. If you want to enjoy watching scrambled broadcasting channels, you need to purchase the CAMs and smart cards from a service provider’s sales department.
1.5 Connecting and Installation 1.5.1 How to connect the receiver to various other systems There are several ways of connecting the receiver to your TV, VCR and/or Hi-Fi SYSTEM. Consult your local supplier for assistance in setting-up your system that is best suited to your requirements. 1.5.
1.5 Connecting and Installation 1.5.5 Connect the receiver to a Hi-Fi System • Connect a RCA stereo cable from the AUDIO L/R jacks, S/PDIF on the receiver to the LINE, AUX, SPARE or EXTRA input jacks on your Hi-Fi System. 1.5.6 Connect the receiver to a Digital Audio System • If you have a DAC with S/PDIF coaxial cable input, you can connect the receiver with it to enjoy higher quality sound. Connect S/PDIF coaxial cable to a digital amplifier.
2. Easy Installation 2.1 Menu Application Press the MENU button on the remote control unit. You will see the “Main Menu” on the screen. • Default PIN code is "0000" • You can move into the desired submenu using the UP/DOWN/LEFT/RIGHT buttons. • You should enter the PIN code in order to move into the corresponding submenu in case of the Installation, the Edit Channel List or the System Setting. • Press the OK button to confirm your selection. • Press the MENU button to return to previous menu.
2.2 Easy Installation 2.2.3 Channel Search You can search the channels. If you press the OK button, the Installation screen will appear If you want to search the channel, you select between Satellite and Terrestrial. And then press the OK button to move to the channel search setting screen. 2.2.4 Satellite - Channel Search Select the satellite you want using the UP/DOWN buttons on the satellite list.
2.2 Easy Installation Ƈ C/KU Switch: You can select C/KU band by selection of switch type. (None, DiSEqC Switch) Ƈ Position (DiSeqC 1.2) After selecting a satellite, please select position number. To change value, press the OK button. The position list will be displayed. Ƈ LNB Freq. Select the proper LNB frequency referring to your LNB using the OK and the UP/DOWN buttons. Ƈ C-LNB Freq. When selecting the C/KU Switch is selected as “None”, the C-LNB Freq will be dimmed automatically.
2.2 Easy Installation Ƈ Scan • After selecting all that is necessary, press the RED button to scan the satellite list. Pop up widow will bedisplayed. • Select ON or OFF according to your Network. • Select All or FTA Search Type. • Select All, TV, or Radio TV/Radio type. • Press the OK button and searching will start. Note • After the Degree, Longitude and Latitude is entered accurately, the DiSEqC Motor will automatically move to the satellite’s position. 2.2.
3. Basic Operation 3.1 Basic Function Usage 3.1.1 Program Information After the television channels have been programmed, you will see the information box each time you change the channels. • Every time you change channels you will receive program information for a few seconds. (In the “Banner Time” menu you can select how long this information will be shown.) • You may change channel with the UP/DOWN button. You can get “Channel Banner” at the bottom of the screen.
3.1 Basic Function Usage 3.1.6 Subtitle • Press the SUB-T(Red) button and the popup window will be displayed on the screen. • Select the Off then subtitle function is off. • Select the Subtitle language, and then you can see Subtitles. 3.1.7 Teletext • If a broadcast supports teletext, you can watch teletext. • If you press the TEXT button, teletext will appear on the screen. 3.1.8 Simple Channel List • When you press the OK button during receiving service stream, you can get “Channel List” view.
3.1 Basic Function Usage 3.1.11 To change the audio output • Press the A.L/R button on the remote control unit to change the output. • Then on-screen menu is displayed on the top right side of the screen. • Press the A.L/R button repeatedly to change the sound mode. (Mono, Left, Right, Stereo) 3.1.12 PIP The PIP (Picture-in-Picture) function allows you to watch two screens at the same time. With the PIP function, you can move the PIP screen or freely adjust the screen size.
3.1 Basic Function Usage 3.1.15 TV/Radio Change With this function, you can change the Radio listening mode while you are watching TV. If you press the TV/RADIO button while you are watching TV, the radio listening screen will appear. If you press the TV/RADIO button again, the TV screen will reappear. 3.1.16 Multi Video Multi Video allows you to watch several channels in one screen simultaneously. It can be used to watch one channel from among several channels.
4. Main Menu Guide 4.1 PVR - Record & Play 4.1.1 Record With this function, you can check file information while recording with the PVR. In addition, you can set the record-end time, and the power to go off after recording. • Press the UP/DOWN button on the PVR menu to select Record and then press the OK button. • When you press the OK button on the Record screen, the Edit screen will appear. • Press the UP/DOWN button on the Edit screen to select the items for setting.
4.1 PVR - Record & Play 4.1.6 Fast-Forward & Rewind The Fast-Forward and Rewind functions enable the user to view the front, back or any desired part of the file. • To view forward parts press the FF button and to view previous parts press the REW button on the remote control. • The screen will move when the relevant symbols appear on the top right-hand side of the screen. • To Rewind or Fast-Forward at a faster speed, press the relevant button again.
4.1 PVR - Record & Play 4.1.11 To File Playback With this function, you can play recorded files. • If you press the MODE/FILE button while watching TV, the File List screen will appear. The currently saved directory in the HDD will be displayed on the File List screen. • Press the UP/DOWN button to select AVDATA and then press the OK button. • Press the UP/DOWN button to select the desired file and then press the OK button. It starts playing. 4.1.
4.1 PVR - Record & Play Note • If you press the GREEN button on the Group Play List pop-up window after selecting the file, the selected file will be deleted. • If you press the RED button on the Group Play List pop-up window, all files will be deleted. Ƈ Play List Edit • If you press the YELLOW button on the File List screen, the File Edit pop-up window will appear. • Press the UP/DOWN button to select the items to be edited and then press the OK button.
4.1 PVR - Record & Play 4.1.15 Timer With this function, you can set reserved recording functions including adding, changing and deleting reserved recordings. You can add a reserved recording. • Press the UP/DOWN buttons on the PVR menu to select the Timer and then press the OK button. • If you press the BLUE button on the Timer screen, the Add screen will appear. • Press the UP/DOWN buttons on the Add screen to select the items for setting.
4.1 PVR - Record & Play 4.1.17 Format HDD • To format the HDD, press the UP/DOWN button on the PVR menu to select Format HDD and then press the OK button. • When the format confirmation pop-up window appears, press the OK button. 4.1.18 HDD Information You can see the HDD Information.
4.2 Edit Channel List From these menus, you can create favorite lists, lock, skip, delete, or move channel. • Select “Edit Channel List” in the main menu with the LEFT/RIGHT buttons and press the OK button. • At the request window, Input PIN code. If you have not entered your own PIN code, then the PIN code 0000 applies, which was set at the factory. • Press the UP/DOWN button in MODE to select the desired mode and then press the OK button.
4.2 Edit Channel List 4.2.1 Favorite(Auto Favorite, 1~31) • You can edit favorite TV and Radio list. This enables you to create the 31 favorite TV and Radio lists. • Select the channel you want to edit on the favorite list and press the OK button. 4.2.2 Lock • From here you can lock channels in any of the list in order to prevent e.g. your children from watching. • Select the channel you want to lock and press the OK button. • Repeat the procedure for each channel you want to lock.
4.3 Program Guide The program guide provides information such as the program listings and ending times for all available programs. You can reserve a recording by pressing RECORD button. Select “Program Guide” in the main menu with the LEFT/RIGHT buttons and press the OK button. In the viewing program, when you press the EPG button, you can get this view. Note • The Program Guide information might not be supported by the service providers. 4.3.
4.4 System Setting You will be asked to enter your PIN code before you can enter this menu. The PIN code preset to 0000 from the factory. If you want to customize the system to suit you better, you can specify some settings from the submenus in the “System Setting” menu. • Select “System Setting” in the main menu with the LEFT/RIGHT buttons and press the OK button. • If you move the focus on the main menu, the contents of the selected menu will be shown. 4.4.
4.4 System Setting 4.4.2 Time • Press the UP/DOWN button on the Setup list to select Time and then press the OK button. • Press the UP/DOWN button to select either Banner Time, Time, or Day Light Saving and then press the RIGHT button to move to the right pop-up menu. Ƈ Banner Time When you switch channels, an information banner will be shown for a few seconds. You can select for how long the banner will be shown. • Select the banner time you want and then press the OK button.
4.4 System Setting 4.4.3 Lock Control • Press the UP/DOWN button on the Set list to select Lock Control and then press the OK button. • Press the UP/DOWN buttons to select either Menu Lock, Parental Lock, Receiver Lock or Change PIN Code and then press the RIGHT button to move to the right pop-up menu. Ƈ Menu Lock If the Menu Lock is already set, the PIN code is needed to set the Edit Channel List and System Setting.
4.4 System Setting 4.4.4 A/V Setting • Press the UP/DOWN buttons on the Setup list to select Display and press the OK button. • Press the UP/DOWN button to select either Screen Type, Menu Transparency, SCART Output, SPDIF Output, RF Channel, RF Mode or TV Type and then press the RIGHT button to move to the right pop-up menu. Ƈ TV If you have a TV set with 4:3 picture format, select 4:3 TV and if you have a TV set With 16:9 picture format, select 16:9 TV.
4.4 System Setting Ƈ RF Mode You can select the RF Mode. If you get picture but no sound, the RF Mode selecting might be wrong. Select an RF Mode and then press the OK button. Note • PAL BG, PAL I, PAL DK, SECAM L, NTSC M 4.4.5 Menu Transparency From 20% to 100% will give the variable transparency on Video and OSD screen. To set menu transparency, press the UP/DOWN buttons.
4.4 System Setting 4.4.8 OTA Upgrade Ƈ To set up OTA Upgrade It is possible to set up OTA upgrade manually. Please check if there is new software as pressing OK button after entering Frequency, Symbol Rate, Const.. Updated software will be downloaded. 4.4.9 Other Setting Ƈ Simple Channel List Hide If you select “ON” in Simple Channel List Hide function, Simple channel list will be disappeared when you change the channel. Ƈ 5V Output 5 volt control for Active Antenna.
4.5 Utility (option) Select “Utility” in the main menu with the LEFT/RIGHT buttons and press the OK button. 4.5.1 Calendar Select “Calendar” in the Utility menu with the UP/DOWN buttons and press the OK button, you can see the Calendar. 4.5.2 Game Press the OK button to move to the GAME folder of the File List. Select the GAME file on the HDD to play the game. 4.5.
4.6 Common Interface The menus are provided by the CA module and its smart card. Your receiver is equipped with two slots of Common Interface(CI), accepting both Type 1 and Type 2 PCMCIA. Plug in the appropriate CI module together with a valid smart card. You will then have access to the respective scrambled and Pay-Per-View services. Insert the smart card into the CI module, and the CI module into the slot behind the flap on the front panel.
6.
www.triax.
