Brochure

Pregrammable Amplifier
TMB 100 & TMB 100S
IMPORTANT!
 AGC: The unit memorizes the average output level. A variation of ± 1 dB triggers the
function and compensates the variation within gain and attenuation limits
 AGC mode hides all other menus. To modify the parameters, switch the AGC mode to OFF
.
 Auto Level: The unit memorizes the selected output level, the function try to reach the value
within input, gain and attenuation limits.
Note: Setting of the levels BI-II / BIII is not automatic.
SAT Menu
TMB 100S models have one IF amplification path. The Sat menu is used to configure the remote
power supply of the LNB (OFF / 13 /17 V
DC), to activate the 22kHz generator and the 9dB equalizer.
 Unit in standby mode, push a button to reach the CONFIG menu.
 Press the  button several times to reach the SAT menu.
 Press enter to activate the SAT menu

Press the  or  button to select the Supp, Gain, Eq, Pol or Band menu.
o Supp (power on or off)
o Gain
o Eq (Equalizer 0dB_off or 9dB_on)
o Pol (H or V polarization)
o Band (Lo/H Band)
 Press enter to activate the selected menu

Press the buttons + or - to change the value

Confirm by pressing enter