Brochure

Pregrammable Amplifier
TMB 100 & TMB 100S
Input amplifier setting.
 Unit in standby mode, push a button to reach the CONFIG menu.
 Press the enter button to select the Comb menu.
 Press the  button to reach the AmpX menu.
 Press enter to activate the menu

Press the buttons + or - to change the configuration of the UHF input amplifiers (on/off)

Confirm by pressing enter
Selection of remote power supply voltage.
 Unit in standby mode, push a button to reach the CONFIG menu.
 Press the enter button to select the Comb menu.
 Press the  button 2 times to reach Vdcx menu.

Press the enter to activate the menu

Press the buttons + or - to select the Voltage (12 or 24 VDC)

Confirm by pressing enter
Enter
Enter
CONFIG
Comb 0010
CONFIG
Vdc 12V
CONFIG
Comb 0010
Enter
CONFIG
Vdc 12V/24V
Enter
<CONFIG>
Enter
2x