TRIAX TR 305 Digital Terrestrial Receiver User's Manual K7_ENGLISH 104313
General Safety Warning Always follow these instructions to avoid the risk of injury to yourself or damage to your equipment. Unplug the receiver from the AC power outlet before cleaning. Use only a damp cloth for cleaning the exterior of the receiver. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : To reduce the risk of electrical shock, do not remove the cover. No user serviceable parts inside.
General Safety Digital Terrestrial Receiver Owner's Manual Channel List OPERATION HANDBOOK Before operation, Please read the entire manual thoroughly and retain it for future reference.
Contents Remote Control Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Connecting Your Equipment . . . . . . . . . . . . . . . . . . .
Contents RF Channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29 Local Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30 Menu Transparency . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30 Change PIN Code . . . . . . . . . . . . .
Remote Control Unit STAND BY NUMERIC BUTTON TV/STB CH UP/DOWN TV/RADIO VOL UP/DOWN MUTE PAUSE UP/DOWN LEFT/RIGHT OK EXIT GREEN BUTTON SUBTITLE(RED BUTTON) P.STD RECALL P.SIZE EPG Note 1 2 6 MENU YELLOW BUTTON / TIMER INFO(BLUE BUTTON) TEXT SLEEP A.L/R A.LANG When inserting batteries, make sure that the polarity (+/-) is correct. The design of the Remote Control Unit may be changed without any notice in advance.
Remote Control Unit STAND BY To switch between operation and stand by mode. NUMERIC BUTTONS To select the channel and enter the channel edit and PIN code. TV/STB To switch between TV and STB receive mode. TV/RADIO To switch between TV and Radio. CHANNEL UP/DOWN To change channel up and down. VOLUME UP/DOWN To increase or decrease the volume. MUTE To enable or disable audio. PAUSE To pause or play video. LEFT/RIGHT To move left or right on the menu. To increase or decrease the volume.
Front Panel 1 8 2 3 4 1. POWER(STAND BY) Switch the receiver power "ON" or "OFF". 2. SEG. DISP. 4-digit 7-segment display channel information. 3. CH S or T Channel Up/Down or select item of sub-menu. 4. Smartcard Slot(Option) 1 shot for smartcard.
Rear Panel 8 10 9 4 7 6 3 5 1 2 1. POWER SUPPLY 90-250V~ 50/60Hz. 2. RS-232 To connect to a personal computer for software upgrade. 3. VIDEO Video connection port to the TV or other equipment. 4. S/PDIF To connect a digital amplifier output. 5. AUDIO Audio connection port to the TV or other equipment. 6. SCART FOR TV Connect this port to the TV via SCART cable. 7. TV OUT 8. RF LOOP IN To connect a TV via a coaxial cable.
Connecting Your Equipment How to connect your STB to various systems There are several ways of connecting the STB to your TV, VCR and/or Hi-Fi SYSTEM. Consult your local supplier for assistance in setting-up your system that is best suited to your requirements. 1. Connect STB to a TV set Connect your STB to a TV set with SCART, if your TV set is equipped for it. Alternatively you can use A/V, TV out (UHF) or S/Video jacks. 2.
Connecting Your Equipment TV with Terrestrial Antenna 1. Connect one end of RCA/Cinch cable to the RCA/ Cinch jack on the back of the STB and the other end to a RCA/Cinch jack on your TV. If your TV doesn’t have a RCA/Cinch jack, connect one end of RF cable to the TV OUT on the back of the STB and the other end to a RF input jack on your TV. 2.
Basic Operation Basic Function 1. Program Information After the television channels have been programmed, you will see the information box each time you change the channels. 1. Every time you change channels you will receive program information for a few seconds. (In the "Banner Time" menu you can select how long this information will be shown.) 2. You may change channel lists with the S or T buttons. You can get "Channel Banner" on the bottom of the screen. 3.
Basic Operation Basic Function 4. Channel-Information Banner 1. During "Channel Banner" is appearing, when you press INFO(BLUE) button, you can get "Channel-Information Banner". 2. Using "Channel-Information Banner", you can get a detailed channel listing information. 5. Volume Control/Mute 1. To control audio volume, press VOL S or T buttons. 2. Volume control bar will be appeared in bottom of the TV screen 3. After time-out in 1 second, volume control bar will disappear.
Basic Operation Basic Function 7. Timer The user can reserve a desired program at a desired time by using the Timerr function. 1. Once, Daily, Weekly Reservation. i Use the S, T, W, or X buttons in the Timer Setting screen to select the date and time. i Press the OK K button to save the selected time on the Disk icon. The program will record at each and every selected time. Once Daily Weekly Off : once : daily : weekly : off 2. Reservation from EPG (Option).
Basic Operation Basic Function 9. Soundtrack 1. When you want to change the Audio Language of current channel, press the A.LANG button on the remote control. The on-screen menu is displayed on the left side of the screen. 2. Use S or T buttons to choose the audio you want. 3. To cancel or exit, press the A.LANG button again. You can change a default audio language in the system setting menu mode. 10. To change the audio output 1. Press the A.L/R R button on the remote control unit to change the output.
Menu Guide Easy Installation Before you can view the television or radio program, you must perform the installation procedure first. Therefore you will see only "Easy Installation Menu" at first when you plug in your system. The Easy Installation gives you the convenience of selecting various languages, adjusting the time and channel search. 1. Automatic Installation by "Easy Installation" The Installation Wizard is user friendly to assure easy set-up of the receiver by the new user. 2.
Menu Guide Easy Installation Language The first option is "Language Select" to select the desired language of the Menu, Audio, or Subtitle. Place the cursor on the sub menu by pressing the keys and press the OK button to change language. The Language of Menu, Audio, or Subtitle will be changed to the selected language. Local Time You can set your local time according to your location. To set the local time, press NUMERIC buttons.
Menu Guide Main Menu Press the MENU button on the remote control unit. You will see the "Main Menu" on the screen. 1. You can move into the desired submenu using S or T buttons. 2. You should enter the PIN code in order to move into the corresponding submenu in case of "Edit Channel List" or "System Setting". 3. Press OK button to confirm your selection. 4. Press the MENU button to return to previous menu. Or press the EXIT button to quit the Menu system completely.
Menu Guide Channel Search Select Automatic/Manual channel search in main menu. Automatic Search 1. Press Automatic Search in Main Menu. 2. Input a proper Start Frequency of the cable signal using NUMERIC buttons. 3. Input a proper End Frequency of the cable signal using NUMERIC buttons. 4. Input a proper Symbol Rate of the cable signal using NUMERIC buttons. 5. Select the Constellation(AUTO, 16, 32, 64, 128 or 256 QAM) using W or X buttons. 6. Press OK button. 7.
Menu Guide Channel Search Select Automatic/Manual channel search in main menu. Manual Search 1. Press Manual Search in Main Menu. 2. Input a proper Frequency of the cable signal using NUMERIC buttons. 3. Input a proper Symbol Rate of the cable signal using NUMERIC buttons. 4. Select the Constellation (AUTO, 16, 32, 64, 128 or 256 QAM) using W or X buttons. 5. Select the spectral Invert (Auto, Off or On) 6. Select for the Network Search(Off or On).
Menu Guide Channel List This menu helps you to easily select the channel that you want to watch. You can see the channel list when you had searched before. To use this menu, you should set channel group you want in the Edit Channel List menu. 1. Select "Channel List" in the main menu with S or T and press OK button. 2. Using S or T buttons, you can choose your channel with small-sized video view on right side. Note To get the full-sized video view, press EXIT button. 3.
Menu Guide Edit Channel List From these menus, You can edit favorite lists, lock, skip, delete, or move channel. 1. Select "Edit Channel List" in the main menu with S or T buttons and press OK button. 2. At the request window, Input PIN code. If you have not entered your own PIN code, then the PIN code 0000 applies, which was set at the factory. 3. Press the SUB-T(RED) button. The edit list will be displayed on the screen. Select the sub menu you want in the list and press OK button.
Menu Guide Edit Channel List 1. Favorite 1 ~ 4 1. You can edit favorite TV and Radio list. This enables you to create the 4 favorite TV and Radio lists. 2. Select the channel you want to edit favorite list and press OK button. Note To rename the Favorite channel, press INFO(BLUE) button. 2. Lock 1. From here you can lock channels in any of the list in order to prevent (e.g. your children from watching.) 2. Select the channel you want to lock and press OK button. 3.
Menu Guide Edit Channel List 5. Move 1. You can change the position of the channel you want on the TV/Radio/ All channel lists. 2. Select the channel you want to move to desired channel and press the OK button. 3. And press the INFO(BLUE) button to change the position of the channel you want. 4. Using S or T buttons, select the channel you want to move and press OK button. 5. The position of the channel will be moved.
Menu Guide Program Guide 1. Now/Next Program Guide Shows the information of Present/Following program on different channels. To watch the programs you go through the display window : 1. Select a program with S or T buttons, you can get the list at right-side view. 2. Use the SUB-T(RED) button to change the channel list. 3. After selecting the program you want, press OK button. You can see the detailed information. 4. If you want to change program guide, press INFO(BLUE) button. 2.
Menu Guide System Setting You will be asked to enter your PIN code before you can enter this menu. The PIN code preset to 0000 from the factory. The code can be changed from the "Change PIN Code" menu. Refer to page 30. If you want to customize the system to suit you better, you can specify some settings from the submenus in the "System Setting" menu. 1. Select "System Setting" in the main menu with S or T buttons and press OK button. 2. Select sub menu you want in System Setting with S or T buttons.
Menu Guide System Setting 3. Subtitle Language In this menu You can change default language for subtitle when changing services. 1. Use the S or T buttons to move to language you want and then press OK button. You can choose the language from a selection of English, Finnish, Swedish, Norwegian, Danish. Note If you cancel the subtitle function, select the off. (Option) 4. SCART Output If your SCART supports RGB control, select RGB. Otherwise select CVBS. 5.
Menu Guide System Setting 6. Banner Time When you switch channels, an information banner will be shown for a few seconds. You can select for how long the banner will be shown. 1. Select the banner time you want and then press OK button. 2. Each selectable time items has meaning of the interval time during a channel banner stays on changed channel screens. The time ranges 1, 3, 6, 9 12, and 15 seconds. 7. RF Mode You can select the RF Mode.
Menu Guide System Setting 10. Menu Transparency From 20 to 63 will give the variable transparency on Video and OSD screen. Select an menu blending ratio and press OK button. The transparency will be applied on the screen. 11. Change PIN Code From here you can change the PIN code from the standard 0000. DO NOT FORGET IT! Without it, you are not able to access to any of the functions where the code is required. You can change password for Parental Lock and Receiver Lock simultaneously. 1.
Menu Guide System Setting 13. Parent Rating If you select "on", you can change the Parental Lock. This function is - if you want the limited age, rating lock function select. 14. Menu Lock If you select "On", you will have to enter the PIN code every time when you enter the Channel Search Menu and Channel List Menu. 15. S/PDIF Output You can hear digital audio of the Dolby 5.1 channel using S/PDIF Output. 1. If selecting OFF, the digital audio will not be output. 2.
Menu Guide System Setting 16. Auto Power 1. If the Auto Power is set to On and power is off, the Set turns on automatically and turns into the channel mode which you were watching before power breakdown. 2. If the Auto Power is set to Off and power is off, the Set turns into the standby mode. 17. Network Search Select 'on' in options to set up Network Search 18. Factory Reset Use this option only if you have to start the complete installation procedure from scratch.
Menu Guide System Setting 19. OTA Upgrade To set up OTA Upgrade. It is possible to set up OTA upgrade manually. Please check if there is new software as pressing OK button after entering Frequency, Symbol Rate, Const.. Updated software will be downloaded. To set up Option Select Option, then select Do not upgrade, Auto upgrade or Auto upgrade with notify. • Do not upgrade • Auto Upgrade : If there is new software, upgrade will be done automatically.
Menu Guide CA System The menus are provided by Smartcard. Your receiver is equipped with one Smartcard slot, Plug in the appropriate a valid Smartcard. You will then have access to the respective scrambled and Pay-Per-View services. Insert the Smartcard into the Smartcard Slot on the front panel. The Smartcard determine the programs that can be de-scrambled. You can view you entitlement via the CA System menu by using the MENU button as below. 1.
Menu Guide Utility 1. Game 1. Select "Game" in the Utility menu with S or T buttons and press W or X buttons. 2. Select the game you want to play and press OK button, and then you can play the game. Tetris Hexa 2. Demonstration Select "Demonstration" in the Utility menu with S or T buttons and press OK button, you can see the Automatic Operation Function. Press the EXIT button to quit the Automatic Operation Function completely. 3.
Menu Guide Utility 4. Zoom Select "Zoom" in the Utility menu with S or T buttons and press OK on, the white frame will appear. 5. Mail Box You can check the messages sent by broadcasting stations.
Troubleshooting Problem Solution No display LED on the front panel. Power cord plug in correctly. No power supply No Picture Ensure that the STB is switched on. Check connection and correct. Check channel and video output and correct Poor picture quality Check the signal level, if this is low then try adjusting the alignment of your dish. No Sound Check the volume level of the TV and STB. Check the mute status of the TV and STB. Check the connection of audio cord.
Technical Specifications Tuner Guard Interval Modes COFDM 2K/8K-Carrier Channel Bandwidth 1/32, 1/16, 1/8, 1/4 FEC Modes Rate 1/2, 2/3, 3/4, 5/6, 7/8 Input Connector IEC 169-2, Female Frequency UHF : 470 ~ 860 MHz, S-Band, VHF : 174 ~ 230MHz Channel Bandwidth 7MHz, 8MHz RF Modulator PLL type CH 21-69 (for Europe) CH 28-69 (for Australia) TV Standard PAL B/G, I, D/K, SECAM L, NTSC M selectable RF Connector 750 Ohms, 169-2, Male/Female Frequency Range Europe (UHF: 470 ~ 860MHz) Australia
Technical Specifications A/V & Data Input/Output Video RCA/Cinch, Video Output(CVBS)/SCART(CVBS, RGB) RCA/Cinch Volume & Mute Control Audio (Resolution: 20 bits DAC, Max 2Vrms) S/PDIF of Dolby Digital Bitstream Out RS-232C Transfer rate 115Kbps, 9 PIN D-Sub Type System Resources Flash Memory 1Mbyte, 2Mbytes (Option) SDRAM 8Mbytes, 16Mbytes (Option) Main CPU MPEG Chip STi 5518 Power Supply Input Voltage AC 90 to 250V, 50/60Hz Power Consumption Max.
Menu Map Main Menu Menu Language Channel List Audio Language Edit Channel List Subtitle Language Program Guide SCART Output System Setting Screen Type Banner Time RF Mode RF Channel Local Time Menu Transparency Change PIN Code Parental Lock Automatic Search Parent Rating Manual Search Menu Lock SPDIF Output Auto Power CA System Utility Network Search Factory Reset OTA Upgrade System Information DIGITAL TERRESTRIAL RECEIVER 39