Brochure
pipe FiTTinGs and nipples
54 | www.tribalmfg.com
THREAD SIZES
FiTTinG THReads peR inCH
1/8" 27
1/4" 18
3/8" 18
1/2" 14
3/4" 14
1" 111/2
11/4" 111/2
11/2" 111/2
2" 111/2
Information
Tribal oers a wide variety of pipe ttings and nipples. Nipples
are available in a variety of lengths and thread sizes; ttings
are oered in a number of congurations using both male and
female pipe threads. Many popular pipe ttings are oered in
both barstock and cast materials. All tapered pipe threads are
manufactured to the highest quality standards and tolerances.
Tribal pipe ttings and nipples are recommended for use with
brass, copper or iron pipe. They are commonly used on oil,
natural gas, water and air lines.
Specications
Temperature: -65°F to 250°F
Working Pressure: 1,000 psi on all barstock ttings and 125 psi on all cast ttings at the temperature range stated above.
Installation Instructions
Place Teon® tape on the male pipe threads and screw the
thread into the female tting until threads stop and the
connection becomes tight. Do not over tighten.
Made in the USA.