Brochure
Hose BaRB FiTTinGs
68 | www.tribalmfg.com
Information
Tribal oers a variety of styles of hose barb ttings including
elbows, tees and adapters. Hose barb ttings can be used with
any tubing soft enough to accept a clamp style connection,
including vinyl and rubber.
Specications
Temperature: -40°F to 160°F
Working Pressure: 150 psi. Do not exceed the recommended pressure rating of the tubing used.
Installation Instructions
Cut tubing square and slide hose clamp onto the hose end.
Push the barbed tting into the hose until the end of the hose
reaches the hex or stop ring. A non-petroleum lubricant may
be used to assist in inserting the tting into the tube. Move
hose clamp over hose and barb and tighten the clamp with
the appropriate tool (depending on the style of clamp) until a
positive connection is made. Do not over tighten.