Use and Care Manual

Installation of Cams and Pins
Screw the pin into the hole. To set the cams correctly, ensure that the arrow on the cam
is opening to the hole of the pin it is locking. Lock the cam by turning the cam head
with a screwdriver until it is tightened. Please do not use an electric screwdriver to
assemble the unit.
Read each step carefully before starting. It is very important that each step of
instruction is performed in the correct order. If these steps are not followed in
sequence, assembly difficulties will occur.
Pin
No gap
B
A
A
B
No gap
P- 05
www.tribesigns.com