Use and Care Manual

10
| TROUBLESHOOTING |
Symptom Possible Reason Possible Solution
Unit does not turn on • Unit not plugged in • Plug unit in
• No power at outlet • Try a different outlet
Little or no mist is produced • Unit not plugged in • Plug unit in
• No power at outlet • Try a different outlet
• No or less water in tank • Fill the water tank
• Unit is not level • Set unit on a flat level surface
• Water tank is not on properly • Position the points to meet
at center
Water Tank Cap is clogged Push the water tank cap
spring to release water from
the tank. Rinse the tank and
change the water.
Wrong button was pushed or • Push the water tank cap
wrong setting was chosen spring to release water from
the tank. Rinse the tank and
change the water.
Smelly mist New machine Clean the unit before use and
let stand for 12 hours
Dirty water or stale water Replace the water with clean
Vibrating noises Tank in incorrect position Position the points to meet
at the center
No or less water in tank Fill the Water Tank
Unit is not level Set unit on a flat level surface
White dust on surfaces Hard water used Use distilled water
Unit is dirty Perform weekly maintenance