EN EN How to Charge Button Control 1. How to charges the speaker 1. Power ON/OFF Connect the speaker with one end of the provided power cord, and plug the other end into a power outlet 2. How to charge other devices through the speaker Conn act the speaker and other devices with the USE.C charging cable, us ISB charging cable Power Button Whitebait light of the power indicator light Is sways on.
2. Bluetooth Connection Device A Device B Bluetooth Button Enter Bluetooth | Bluetooth indicator $ Short Press | piing mods | light Ashes quickly Formation Blast! Autocratically connects back to 1 paired device; Connects 2 devices at the same time; Memorizes 8 Bluetooth devices; When two devices are simultaneously connected to the Storminess Blast, device A needs to pause tha playback and then device 8 can play. 3.
4, Volume Adjustment Short Press Increase the volume de Long Press Keep increasing the medium Short Press Decrease the volume Long Press Keep decreasing the value B. Lighting Atmosphere Effect Light Button ote | spot | Meerschaum | Lighting effect indicator “0 | Sor | nightingale effect | whits light is always on/ @ rode off &.
. Stereo Mode @ Please make sure that the hwo speakers ane turned on. @ Long press the Bluetooth button of the speaker A for 55 to enter the Stereo Made pairing { Note: this speaker will be gabardine as the main speaker | Short press the Bluetooth button of the speaker B to enter the pairing mode [ Note: this speaker will be regarded 2s 5 endurance speaker J; @ When you hear the prompt sound "stairs mode’, the paling is successful and the speaker A & speaker B enter the Stereo Mode.
Product Specifications Bluetooth Damion WEE Bluetooth Protocol AVDP, AVER, Output Power BOW Frequency Response » Range 50-kHz Frequency Band Range | 2402-2480MHz Maxim urn Transmission | ooo Battery (36V SAMAR'S) / TL2EWh 20 hours [different according to Flay Tami different music and volunteer] Charging Time 4.
FCC Statement Changes or modifications not expressly approved by the party responsible far compliance could cold the users authority to operate the equipment. This equipment has been tested and found to comply with the nits for a Class 8 digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.