IMPORTANT USER INFORMATION PLEASE RARED THIS INSTRUCTION BOOK m BEFORE USING THE APPLIANCE IT 1S MOST IMPORTANT THAT THIS INSTRUCTION BOOK SHOULD BE RETAINED WITH THE APPLIANCE FOR FUTURE REFERENCE. SOLD OR TRANSFERRED TO ANOTHER OWNER, OR SHOULD THE APPLIANCE BE SHOULD YOU MOVE HOUSE AND LEAVE THE APPLIANCE, ALWAYS ENSURE THAT THE BOOK IS SUPPLIED WITH THE APPLIANCE IN ORDER THAT THE NEW OWNER CAN BE ACQUAINTED WITH THE FUNCTIONING OF THE APPLIANCE AND THE RELEVANT WARNINGS.
CONTENTS Conservation Specifications Installation Electrical Connections General Features Using Your Freezer Health And Safety Guidelines Maintenance And Cleaning What Happens If Something Goes Wrong? Rating Plate Help Us To Help You Trinity Bendix Service Centers Guarantee Page 4 Page 5 Page 6 Page 9 Page 10 Page 11 Page 14 Page 15 Page 16 Page 17 Page 17 Page 18 Page 19
CONSERVATION In The Interests Of The Environment: When disposing of your old fridge, freezer or fridge/freezer: Check with your local Council or Environmental Health Officer to see if there are facilities in your area for collecting the gas from the appliance for re-cycling. This will help reduce the amount of CFC gas released into the atmosphere. Help to keep your countryside tidy use authorized disposal sites for your old appliances.
INSTALLATION This appliance is designed to be fitted into a space with the dimensions shown in Fig. 1. N Yw00.170 Fig. 1 Final adjustment for height can be achieved by adjusting the feet on the base of the appliance (Fig. 2). Fig. 2 Reversing the door Remove the 2 screws that hold the top hinge to the door. Lay the appliance carefully on its back and remove the plastic insert. Remove the 2 screws that hold the bottom hinge to the door.
Mounting the cupboard door panel Place the appliance into the position where it will be installed adjusted to the required height via the front and rear feet. Place the pag( r template horizontally so that the line X' is along the top edge of the appliance door (Fig. 6). On the scale Y' either end of the template above the line X, select whichever graduation line corresponds with the top of the adjacent cupboard door or drawer lines (the graduations marked 1 24) (Fig. 8).
To align the top edge of the wooden panel with adjacent doors or drawers rotate the lower cam wheels 'B' (Fig. 10}, Fig. 10 To adjust the vertical line of the doer, slide the door on the clamping nuts to the left or right as required. it iris necessary to adjust the door outwards loosen the back section of the clamping nut from the appliance door to the required distance {Fig. 10A). Fig.
ELECTRICAL CONNECTIONS WARNING: THIS APPLIANCE MUST BE EARTHED. The manufacturer declines any liability should this safety measure not be observed. It the plug this is fitted to your appliance is not suitable for your socket outlet, it must be cut off and the appropriate plug fitted. Remove the fuse from the cut off plug. The cut off plug should then be disposed of to prevent the hazard of shocks in case it should be plugged into a amp socket in another part of your home.
GENERAL FEATURES Fresh food freezer basket Frozen food ~. Storage \Control panel Frozen food storage basket with access to recessed storage area 10
USING YOUR FREEZER [ 1 This kX freezer is suitable for the storage of commercially frozen food marked with 2 4 stars. The normal operating temperature of -18°C is suitable for long term storage of frozen food. Pr-packaged, commercially frozen food is normally suitable for storage of unto 3 months, unless otherwise stated by the food manufacturer. This appliance is also suitable for freezing fresh food. The top basket should be used to freeze fresh food.
¢} Due to defrosting. Then recommended storage life may be reduced and storage times may not apply. Frozen food which is allowed to thaw accidentally should either be used immediately or thrown away. Alternatively if the food is uncooked and has not been completely defrosted it can be cooked and then refrozen. . ICE MAKING Fill the ice tray with fresh drinking water to just below the top of each cube compartment and place in the top compartment where it will freeze quickly.
DEFROSTING The frost should be occasionally removed using either a stiff bristle brush or a plastic scraper. Heavy frosting (about 1/4" thick) will reduce the freezer's efficiency and complete defrosting should be carried out at this stage.
HEALTH AND SAFETY GUIDELINES Because of consumer demand, preservatives have been removed from many per-prepared food. This together with the changes in shopping habits to a once-a-week shop, mean that the safe handling and storage of food is even more important than ever. The following tips should help you to ensure that the food in your home is in as perfect a condition as possible. * Keep the time between buying chilled and frozen food and placing it in your freezer as short as possible.
MAINTENANCE AND CLEANING Before any maintenance or cleaning is carried out DISCONNECT the appliance from the electricity supply. Then empty the cabinet and take out any loose accessories. Cleaning The Interior Cabinet Clean the inside of the appliance with a clean cloth wrung out solution of bicarbonate of soda and warm water (5mi to 0,5 liter of water), Clean all accessories and wash the door and clean the baskets. Dry the inside of the appliance thoroughly.
WHAT HAPPENS IF SOMETHING GOES WRONG? If your appliance fails to work properly and you have followed these instructions carefully, contact your local Trinity Bendix Customer Service Center whose details can be found at the back of this instruction booklet. Before you do this, however, it is worth making the following checks: * s the plug firmly connected to the wall socket and is the socket switched on? % Check the power supply by plugging in another appliance which you know is working.
Rating Plate The rating plate is situated inside the cabinet behind the salad drawer of freezer bin. it gives the model and serial numbers which should be quoted in any communication. For future reference record the information below: Model No: Serial No: Date of Purchase: HELP US TO HELP YOU Service Before calling out an engineer, please ensure you have followed the checklist. Telephone numbers are detailed on the list headed "Trinity Bendix Service Crescent. When you contact us we need to know: 1.
GUARANTEE This guarantee is offered to you as an extra benefit and does not affect your legal rights. Trinity Bendix products are carefully designed, manufactured, tested and inspected and in consequence we undertake to replace or repair any part found to be defective in material or workmanship, within one year of delivery to the original purchaser, free of charge. The Company does not accept liability for defects arising from neglect, misuse, or accident.
TRINITY BENDIX L1 1 ] we'll do the homework TRINITY BENDIX, 99 OAKLEY ROAD, FUTON, BERKSHIRES, LU4 9QQ. A Division of Emacs Limited Registered in England No. 176547 Registered Office.
