CONTENTS Warnings . Conservation Installation . Positioning Before using . The electrical connections . Instructions for totally built-in appliances . Your appliance . Operation Setting the temperature . Fresh food refrigeration . Positioning the door shelves Defrosting. Health and safety guidelines . Maintenance and cleaning Internet cleaning External cleaning . When the appliance is not in use . Changing the light boob What happens if something goes wrong? . Guarantee conditions .
WARNINGS ITS MOST IMPORTANT THAT THIS INSTRUCTION BOOK SHOULD BE RETAINED WITH THE APPLIANCE FOR FUTURE REFERENCE. SHOULD THE APPLIANCE BE SOLD OR TRANSFERRED TO ANOTHER OWNER, OR SHOULD YOU MOVE HOUSE AND LEAVE THE APPLIANCE, ALWAYS ENSURE THAT THE BOOK IS SUPPLIED WITH THE APPLIANCE IN ORDER THAT THE NEW OWNER CAN GET TO KNOW THE FUNCTIONING OF THE APPLIANCE AND THE RELEVANT WARNINGS. THESE WARNINGS ARE PROVIDED IN THE INTEREST OF SAFETY.
CONSERVATION In the interests of the Environment: When disposing of your old fridge, freezer or fridge/freezer. Help to keep your country tidy — use authorized disposal sites for your old appliances. For maximum efficiency: Make sure that the appliance is cleaned properly. Make sure that the door is closed properly. Do not position the appliance near to sources of heat. Do not over-fill your appliance, air MUST be allowed 1o circulate.
INSTALLATION Warning IF YOU ARE DISCARDING AN OLD APPLIANCE THAT HAS A LOCK OR CATCH ON THE DOOR, YOU MUST ENSURE THAT IT IS MADE UNUSABLE TO PREVENT YOUNG CHILDREN BEING TRAPPED INSIDE. Positioning The appliance should be installed well away from sources of heat such as radiators, boilers, direct sunlight etc.; best performance is obtained with ambient temperature between +10°C and +32°C. For building-in and door reversibility, if necessary, refer to the relevant instructions in the following pages.
The electrical connections WARNING: THIS APPLIANCE MUST BE EARTHED. The manufacturer declines any liability should this safety measure not be observed. If the plug that is fitted to your appliance is not suitable for your socket outlet, it must be cut off and the appropriate plug fitted. Remove the fuse from the cut off plug. The cut off plug should then be disposed of fo prevent the hazard of shocks in case it should be plugged into a amp socket in another part of your home.
Instructions for totally built-in appliances Dimensions of the recess Height of housing 880 mm Depth of housing 550 mm Width of housing 560 mm The appliance’s door has been locked in position for transport by means of pins on both sides. According to the door opening direction, remove relevant pins at the top and at the bottom. For appropriate venting, follow indications in Fig. 2. Fig. 2 50-min. e’ 200 f e Dons Push appliance into the housing until stop strip (A} touches the kitchen unit. Fig.
Apply covers {B} on joint cover lugs and into hinge Remove the little plates and make the holes with a dipoles. Replace the little pistes over the runners Fig.7 and screw in the screws provided (3.56x16 mm). For the alignment of the kitchen unit dewy, if necessary, use the clearance size of the slotted holes. At the end of the procedure, check that the doors of the appliance and the kitchen unit open properly. Fig.
YOUR APPLIANCE Dairy compartment B Can storage sh C Movable shelf < D Bottle storage sheaf E Salad drawer F Glass shelf {for storing fresh meat) G Storage shelves H Thermostat control
OPERATION Setting the temperature The temperature inside the refrigerator is regulated by a thermostat with 6 temperature positions and one «OFF» {0y position.
HEALTH AND SAFETY GUIDELINES Because of consumer demand, preservatives have been removed from many per-prepared food. This together with the changes in shopping habits to a once-a-week shop, mean that safe handling and storage of food is even more important than ever. The following tips should help you to ensure that the food in your home is in as perfect condition as possible. = Keep the time between buying chilled food and placing it in your fridge as short as possible.
MAINTENANCE AND CLEANING Before any maintenance or cleaning work is carried out, DISCONNECT the appliance from the ELECTRICITY supply. Internal cleaning Clean the inside and accessories with warm water and bicarbonate of soda {8mi to 0.5 liter of water}. Rinse and dry thoroughly. NEVER USE DETERGENTS, ABRASIVE POWDERS, HIGHLY PERFUMED CLEANING PRODUCTS OR WAX POLISHES, TO CLEAN THE INTERIOR AS THESE WILL DAMAGE THE SURFACE AND LEAVE A STRONG SMELL.
WHAT HAPPENS IF SOMETHING GOES WRONG? Before contacting your local Trinity Bendix Service Center, check the following points: The appliance does not work... Check that: = There is power at the socket. = Ensure that there is not a power cut by checking the household lights. # The fuse has not blown. ® The air circulation passages are not covered. *= The thermostat dial is in the correct position. Vibration or abnormal noises...
PEACE OF MIND FOR TWENTY FOUR MONTHS Guarantee conditions We, Trinity Bendix, undertake that if, within twenty four months of the date of the purchase, this Trinity Bendix appliance or any part thereof is proved 1o be defective by reason only of faulty workmanship or materials, we will, at our option, repair or replace the same FREE OF ANY CHARGE for labor, materials or carriage on condition that: = The appliance has been correctly installed and used only on the electricity supply stated on the rating plate
TRINITY BENDIX 5 B | Better Products. Better Value. Trinity Bendix, 99 OAKLEY ROAD, Futon, Beds LU4 9QQ A DIVISION OF EMACS LIMITED Model No. REGISTERED IN ENGLAND NO. 176547 Part No.