User manual

8
Door reversal directions
Before carrying out the operations described
below, pull out the mains plug from the wall
socket.
Gently lay the fridge/freezer on its back with the
top held away from the floor by 5-8 cm (2-3
inches) of packing;
Remove the feet (2-3).
Remove bottom hinge (1).
Slide out the lower door from middle hinge (H)
and remove the latter.
Slide out the upper door from pin (G), unscrew
the latter and then screw it down into the hinge
provided on the opposite side, after having
removed the small plugs which should then be
fitted on the opposite side.
Unscrew the handle. Refit it on the opposite
side after having pierced the plugs with a
punch. Cover the holes left open with the plugs
contained in the documentation pack.
Refit the upper door and the middle hinge on
the opposite side.
Refit the lower door and bottom hinge (1) on the
opposite side.
Refit the feet (2-3)
Attention
After completion of the door reversibility
operation, check that the door gasket adheres
to the cabine”. If the ambient temperature is
cold (i.e. in Winter), the gasket may not fit
perfectly to the cabine”. In that case, wait for the
natural fitting of the gasket or accelerate this
process by heating up the part involved with a
normal hairdrier.
G
D590
Fig. 5
PR24
H
PR220
D715
1
2
3
Fig. 6
Fig. 7
Fig. 8