RANGE HOOD USER MANUAL
READ AND SAVE THESE INSTRUCTIONS MANUAL CONTENTS TECHNICAL CHARACTERISTICS ..............................1 IMPORTANT SAFETY INSTRUCTIONS ...................2-3 INSTALLATION REQUIREMENT................................4 INSTALLATION PROCEDURES................................5-7 OPERATING INSTRUCTION....................................7-8 MAINTENANCE.........................................................9 TO REPLACE LIGHT ................................................9 TROUBLE SHOOTINGS...................
Dear consumer, Thanks for your purchase of our range hood and we hope we can fully satisfy all of your needs. Please read the entire instructions carefully before proceeding to obtain the best results of operation the range hood.
light light
Wear electrical shock. range INSTALLATION: USE ONLY WITH RANGE HOOD CORD CONNECTION KITS THAT HAVE BEEN INVESTIGATED AND FOUND ACCEPTABLE FOR USE WITH THIS MODEL RANGE HOOD. A UTILISER SEULEMENT AVEC UNE TROUSSE DE RACCORDEMENT DE CORDON DE HOTTE VERIFIEE ET APPROUVEE POUR EMPLOI AVEC CE MODELE DE HOTTE.
range range range make sure CORRECT NOT LEVEL NOT CORRECT
Hanger 8 Hanger
Use 16pcs m4 screws to fix the hangers 16 16 197 nuts
1.How to use the Touch Control Press to turn on /off the light. Press to select the high speed. Press to select the medium speed. Press to select the low speed. Press to select on/off. Light Timer Speed down Speed up Max speed On/off Turn on and turn off the light Set time Speed down, from speed 3 to speed 1 Speed up, from speed 1 to speed 3 To start max speed To turn on and turn off the power Time setting: Press for approximately 3 seconds. Touch (Speed up) to set hour.
range light light Light the range light LED light light light light.
WARNING – TO REDUCE THE RISK OF A RANGE TOP GREASE FIRE: a) Never leave surface units unattended at high settings. Boilovers cause smoking and greasy spillovers that may ignite. Heat oils slowly on low or medium settings. b) Always turn hood ON when cooking at high heat or when flambeing food (i.e.Crepes Suzette, Cherries Jubilee, Peppercorn Beef Flambe’). c) Clean ventilating fans frequently. Grease should not be allowed to accumulate on fan or filter. d) Use proper pan size.
CAUTION: Disconnect the power supply before servicing. STATUS CAUSE & METHOD OF REPAIRING TOOL The power supply is damaged If the power supply is damaged, please call the technician to repair. Screwdriver The motor does not run A). The fan was blocked, check the fan make sure it is in the correct place. B). The motor was blocked, check the motor and make sure it’s in the correct place. C). The motor was broken, replace a new one. D). The switch was broken, replace a new one. E).
