Quick Start Guide

Adjustment Procedures
SIDE PARALLAX ADJUSTMENT
Parallax is the perceptible movement of the reticle on the target as
the shooter moves their head up and down, or side to side. Parallax
adjustment can improve accuracy. Adjustment is recommended at all
distances to improve accuracy.
Checking parallax is done by slightly lifting your head off of the stock
and moving your head left and right and up and down while looking
though the scope. Does the reticle appear to move while it is placed on
the target? If so, rotate the side Parallax Adjustment knob until parallax
or reticle movement is minimized. There are yardage indicators on the
Parallax Adjustment knob that serve as approximations. For example, if
target is 300 yards away, rotate Parallax Adjustment to the 300 mark and
make fine tuning adjustments by viewing through scope.
You may notice your Field of View (FOV) is more focused when making
parallax adjustment. The key point is to make sure the reticle is not
moving instead of concentrating on how sharp your image is. If your
reticle parallax is correct, your target should be sharp and in focus.
Limited Lifetime Warranty
The original owner of the Trijicon
®
product registered with
the warranty card is entitled to repair or replacement (at
our option) of the registered item if it should fail due to
defects in material or workmanship during normal use.
This warranty specially applies to the optical systems and
metal structure of the product and does not apply to the
illumination system. Electronics are warranted to be free
of defects in material and workmanship during normal use
for a period of 5 years from the date of manufacture. If
repair is necessary, please contact our Service and Repair
Department for return instructions. This warranty does
not apply to defects caused by anything which is deemed
abnormal, abusive, or improper including any fault resulting
from an accident or improper service. Please note that
the manufacturer’s warranty will be void and the product
cannot be serviced if it is exported from the United States in
violation of U.S. Export Control Laws and Regulations. Any
attempt at disassembly or repair will annul this warranty.
This warranty gives you specific legal rights, and you may
also have other rights which vary from state to state.
Trijicon.com/Tenmile
Trijicon.com/TenmileHX
© 2021 Trijicon, Inc. | Printed in USA
Specifications subject to change without notice. | PML6044 Rev(2) 0121
For additional information, product downloads, or answers to
Frequently Asked Questions (FAQ) visit trijicon.com. Please contact
our Customer Service Department for other product service inquiries
at 1-800-338-0563 or email us at [e-mail].
This Trijicon
®
product requires very little maintenance. If the lenses
become dirty, wash using fresh water and a soft clean cloth. Remove all
foreign matter from the lens surface fully before wiping them with a soft
cloth. The outside lenses may fog over in cold weather. Remove fog by
using a dry, clean soft cloth. Anti-fog solutions can be applied if desired.
Troubleshooting
Maintenance