Quick Start Guide

ManualsBrandsTrijicon ManualsOpticsAccuPoint 2.5-12.5x42 Riflescope

General Information

TRITIUM FAILURE INSPECTION

Refer to the PREPARATION FOR USE section for the

procedure to follow to determine if the tritium lamp in this

Trijicon

product is working correctly.

WARNING

Before installing the optic on a ﬁrearm, ensure the ﬁrearm is UNLOADED.

RADIOACTIVE MATERIALS SAFETY

PRECAUTIONS

This Trijicon

product contains radioactive material for low

light/no light illumination. The radiation source is hydrogen-3

(3H), commonly known as tritium. Tritium is an odorless,

tasteless, colorless gas that reacts to the human body in the

same manner as natural hydrogen. The human body does not

easily retain hydrogen or tritium as a gas. However, the oxide,

HTO, which is formed by the burning of tritium, is 10,000 times

more hazardous. For this reason, great care should be taken

to avoid ﬂame in the presence of a Trijicon optic with a tritium

lamp which is broken or is suspected of leaking. If the tritium

lamp in the Trijicon product is crushed or severely damaged

to the extent that the tritium lamp inside might be damaged,

follow safety procedures on next page. This Trijicon product is

regulated under an EXEMPT LICENSE from the United States

Nuclear Regulatory Commission (NRC) held by Trijicon, Inc.

As per the license agreement, disassembly of the scope is

prohibited except by Trijicon, Inc.

HANDLING A DAMAGED PRODUCT

DO NOT handle a damaged unit if you have open skin cuts or

abrasions (use gloves). If the tritium lamp in a Trijicon

product

is broken or suspected of being broken, work in a well ventilated

area and avoid inhaling air near the unit. Place the unit in a sealed

plastic bag and contact Trijicon’s Customer Service Department

(see CONTACT information on page 51). Immediately following

contact with the unit, wash your hands with soap and water.

WARNING

DO NOT eat, drink, smoke, or apply cosmetics in the

presence of a damaged Trijicon

product.

CAUTION

DO NOT allow harsh organic chemicals such as acetone,

trichloroethane, or other cleaning solvents to come in

contact with this Trijicon

product. They will affect the

appearance, but not the performance.

CAUTION

When mounting this Trijicon

product onto the rail of a

ﬁrearm, do not tighten the mount screws beyond the

recommended torque setting provided by the mount

manufacturer. Damage may occur to the optic and/or zero

retention may be negatively affected.

Quick Reference Guide

Trijicon AccuPoint

Summary of content (7 pages)

PAGE 1
General Information Trijicon AccuPoint Quick Reference Guide ® RADIOACTIVE MATERIALS SAFETY PRECAUTIONS HANDLING A DAMAGED PRODUCT This Trijicon® product contains radioactive material for low abrasions (use gloves). If the tritium lamp in a Trijicon® product light/no light illumination. The radiation source is hydrogen-3 is broken or suspected of being broken, work in a well ventilated (3H), commonly known as tritium. Tritium is an odorless, area and avoid inhaling air near the unit.
PAGE 2
Introduction Characteristics The Trijicon AccuPoint® features a unique combination of advanced 1-4x24 1-6x24 2.5-10x56 2.5-12.5x42 TR24 Series TR25 Series TR22 Series TR26 Series Magnification Range 1 - 4x 1 - 6x Magnification Range 2.5 - 10x 2.5 - 12.5x Objective Lens Size 24mm 24mm Objective Lens Size 56mm 42mm 2.0 - 3.5 in. 52 - 88mm .69 - .2 in. 17.5 - 5.1mm 2.8 - 5.0 in. 71 - 127mm .47 - .16 in 12 - 4.1mm 2.8 - 4.6 in. 71 - 117mm .64 - .22 in. 16.3 - 5.6mm 2.8 - 4.3 in.
PAGE 3
Characteristics 3-9x40 3-18x50 4-16x50 4-24x50 5-20x50 TR20 Series TR34 Series TR31 Series TR32 Series TR33 Series Magnification Range 3 - 9x 3 - 18x Magnification Range 4 - 16x 4 - 24x Magnification Range 5 - 20x Objective Lens Size 40mm 50mm Objective Lens Size 50mm 50mm Objective Lens Size 50mm 2.2 - 3.8 in. 56 - 97mm .52 - .17 in. 13.3 - 4.4mm 3.4 - 4.0 in. 87 - 101mm .45 - .11 in. 11.4 - 2.8mm 3.1 - 3.8 in. 78 - 96mm .33 - .12 in. 8.5 - 3.1mm 3.1 - 3.8 in. 78 - 96mm .33 - .
PAGE 4
Science of Brilliant ® ALASKA-TO-AFRICA TEMPERATURE TESTED To ensure each family of riflescopes is ready for whatever our users put them through, we perform “Alaska to Africa” temperature shock tests with temps from -20°F to 140°F. Preparation for Use TRITIUM INSPECTION It is recommended that the tritium lamps be checked for proper functioning every six months, or immediately following any incident which might lead to lamp failure (such as severe impact to the AccuPoint®).
PAGE 5
Adjustment Procedures ZEROING THE RIFLESCOPE There are two adjusters, one for windage (right side of scope) and one for MAGNIFICATION DIAL There are two different types of adjusters in the AccuPoint family. elevation (top). The arrows on the adjusters indicate direction to turn the Trijicon AccuPoint® riflescopes are available in various ranges of Capped adjusters are located under the removable turret cap. External adjusters in order to change bullet impact. magnification.
PAGE 6
Adjustment Procedures EXTERNAL ADJUSTERS / RETURN TO ZERO CAPPED ADJUSTERS FIBER OPTIC BRIGHTNESS ADJUSTER Once the rifle’s elevation is zeroed, remove the adjuster turret by turning the With the adjuster cap removed, pull the adjustment dial out and it will The aiming point of the AccuPoint® is always illuminated. During lighted threaded top cap counter-clockwise (1). Remove the top cap (2), remove the spin freely, push down at the zero position.
PAGE 7
Adjustment Procedures Maintenance SIDE PARALLAX ADJUSTMENT (IF EQUIPPED) This Trijicon® product requires very little maintenance. If the lenses Parallax is the perceptible movement of the reticle on the target as the become dirty, wash using fresh water and a soft clean cloth. Remove shooter moves their head up and down, or side to side. Parallax adjustment all foreign matter from the lens surface fully before wiping them with can improve accuracy.