Installation Guide

SecureMesh
TM
Gateway Installation Guide
Trilliant Incorporated page 12 of 21
Completing the installation
 Check the connections and close the device
Check to ensure all connections and grounding are
proper, and replace the surge protector’s cover and the
Ethernet connection cover on the base of the Gateway.
These screws should be tightened to 15 foot-pounds
(20 Newton-meters) of torque.
 Secure the Cabling
Use sturdy cable ties or Velcro wraps (not included) to
secure all the cabling against strain, especially if the
installation is subject to high winds.
sturdy cable ties or
Velcro wraps