Installation Guide

SecureMesh
TM
Gateway Installation Guide
Trilliant Incorporated page 15 of 21
Connecting the Device to a Source of Power
The Streetlight Installation Kit is to be used with constantly powered streetlights that use standard photocell
adapters. The Streetlight Installation Kit is complete with an A/C to D/C power supply that also provides surge
protection.
Connect to Streetlight AC Power
 Locate the photocell on the light pole (usually located
on top of the street lamp) and remove it; twisting it
counter-clockwise and lifting it from the socket.
 Connect the photocell adapter (power tap) to the
photocell socket; twisting clockwise until hand tight.
 Replace the photocell on top of the photocell
adapter; twisting clockwise until hand tight.
 Coil any excess cable. Place it in the space provided
under the mount stand and secure it.
photocell
photocell adapter /
power tap