Installation Guide

SecureMesh
TM
Gateway Installation Guide
Trilliant Incorporated page 8 of 21
Pre-provisioning
Certain information is necessary in a Gateway other than the factory defaults that must be entered locally using
the command line interpreter (CLI). Please refer to the ―Trilliant Network Element Management System
(NEMS) Administration Guide‖ (Trilliant document number TLT-CS-ADM-94) for complete information.
They required information to be entered is:
 Netkey
 Management VLAN (if Management VLANs are used)
 VPN Shared secret (if using IPsec VPN. Please refer to Trilliant Technical Note ―Use of Virtual Private
Networking in the SecureMesh Communications Network‖, number DP-0906)
INSTALLING THE GATEWAY
Physically installing the SecureMesh Gateway involves:
 Mounting the device
 Grounding and protecting the device
 Connecting to a source of power
 Completing the installation
Installation of the Gateway either to a tower or utility-pole or to a streetlight is discussed in the following
subsections.