User Manual

RES-3000-I210+ / I210+RD / I210+c
PA-0115A Rev. 1.4
March 11th, 2011 Page 5 of 6
3. Install the SecureMesh board by first inserting the female connector in the I-210+ male
connector as shown. Align the 2 HEX Aluminum posts with the 2 holes in the GE I210+
meter faceplate.
4. Attach the two mounting screws (HS-0013I)
through the faceplate into the 2 HEX posts so
that the SecureMesh board is held securely in
place. Torque screws to 2 +/-0.2 Inch pounds.
Male-Female
connector mating
Screws
(For Trilliant internal use: Milwaukee #2)