User's Manual

For more information on LED states, see Table 1.
Table 1. SkyConnector LED states
LED LED state Device state
LAN Link Steady illumination SkyConnector is connected to another
device via its Ethernet port.
LAN Act Blinking Device is transmitting or receiving data via
its Ethernet port.
PWR Steady illumination Device is powered on.
WAN Link Blinking (fast blink when
device is in standby
mode)
Device is attempting to establish an
authorized connection on the wireless
network.
If both WAN Link and WAN Act continue
to blink, the signal is not strong enough to
support reliable service or there is a
provisioning problem that’s preventing
the device from coming online. Contact
your network administrator.
Steady illumination Device is connected to the wireless
network.
WAN Act None Device cannot detect a wireless network.
Blinking Device is within the coverage area of a
wireless network. Blink rate communicates
signal strength:
• Fast (8x per second) = excellent
• Medium (4x per second) = good
• Slow (<1x per second) = poor
• None = no reception
Mounting the SkyConnector
After determining an optimal location for your SkyConnector, you can mount the
device and run the appropriate cables.
SkyPilot SkyConnector Installation 21