User Manual

SkyPilot SkyAccess DualBand Installation 24
Mounting the SkyAccess DualBand
After determining an optimal location the SkyAccess DualBand can then
be mounted in accordance with the procedure below.
Before mounting the device, disconnect the CAT5 cable from the power
injector to power down the device.
1 Connect the 2.4 GHz antenna.
To provide Wi-Fi connectivity, the SkyAccess DualBand requires
attachment of the 2.4 GHz antenna included with the device. Screw
the antenna onto the standard N connector on the back of the
SkyAccess DualBand.
Figure 8. Attaching the 2.4 GHz antenna