User's Manual

SkyPilot SkyAccess DualBand Installation 17
o Magnetic level
o Steel pole between 1 1/8" (2.87 cm) and 1 3/8" (3.48 cm) in
diameter
• For network cabling:
o A spool of CAT5 network cable (shielded cable is
recommended)
NOTE Ethernet cabling must comply with NEC/CEC
requirements for outdoor CAT-5 cables. The cabling’s
outer jacket must be clearly marked as CAT-5e per
ANSI/TIA/EIA-568-B.2.
o Crossover cable (for connecting to a an access point, switch,
or router)
o RJ-45 connectors (connectors without a protective “boot” are
recommended)
o RJ-45 crimping tool
• For configuration:
o Computer with a serial port, a terminal emulation program, a
network interface card, and a Web browser (laptop
recommended for convenience)