User's Manual

SkyPilot SkyAccess DualBand Installation 31
Figure 3-6. Attaching the SkyConnector
5 Reconnect the CAT-5 cable to the port labeled “CPE” on the
SkyConnector power injector.
Configuring the SkyConnector
To operate on the wireless mesh network, the SkyGateway requires a
network configuration.
A SkyConnector will not transmit a wireless signal until it’s configured,
and it will not be able to connect to other network devices without a
configuration.
SkyPilot offers two modes for provisioning devices with a configuration:
4