User's Manual
4
Non-doorbell e-PAD Operation and Features
The e-PAD is shipped with default authority and access codes. Unless the
OEM or dealer has changed default codes, the authority and access
codes are as follows:
Access code:
Digit 1 Digit 2 Digit 3 Digit 4 Digit 5
1/2 3/4 5/6 7/8 9/0
Authority code:
Digit 1 Digit 2 Digit 3 Digit 4 Digit 5
7/8 7/8 7/8 7/8 7/8
Locking doors with keypad
Press and hold down the (1 / 2) or (1) button for 1-2 seconds. An access
code is not needed to lock the doors.
Secure Operations
Entering a valid 5-digit access code enables secure operations. After
entering an access code, the keypad is enabled for 5 seconds and an
additional button press initiates a secure operation, such as unlocking the
doors.
Notes:
• The authority code does not allow for secure operations. It is
only used to assign access codes (see page 9 for information
on setting access codes).
• If an unassigned button or no button is pressed while the
system is enabled, the keypad reverts back to disabled state.
• The secure keypad operations are set depending on the
system configuration.