User's Manual

8
English
2. Preparing For First-Time Use
Charging the Power Module
To charge the power module:
• Plug in your charger and connect the power module to
the charger as shown opposite.
•Charge for a minimum of five hours or preferably
overnight (even if the charger indicates that the battery is
full).
• Verify that the battery is fully charged by pressing the
button on the back side of the power module. The four
LEDs should light up green.
The power module contains rechargeable lithium-ion battery
cells and “smart” charging circuitry. Recharging the power
module is done using the AC/DC power supply, included
with the system.
This power supply can also be used to provide power
directly to the Z-Max.Net through an external connector.
The charger is designed to work with a 110-240 VAC power
source and delivers 12 V DC of input voltage with at least
4-A current capability to the power module.
For more information on the characteristics and manage-
ment of the power module, see Z-Max.Net Reference Man-
ual.
Use of non-Thales power
supplies for charging the
power module is not
recommended.