User's Manual

21
English
Saving Bluetooth Serial Port Settings
You will save much time when next starting your system if
you follow the procedure below the first time you set up the
required Bluetooth connections.
For each detected Z-Max.Net unit, do the following:
1. Tap and hold Bluetooth Serial Port and then tap
successively
Auto Connect and then Save Settings.
With these options activated, and provided you do not
turn off Bluetooth Manager before shutting down the
field terminal, Bluetooth Manager will automatically
restore the Bluetooth connections when you next turn on
your field terminal.
Obviously, Bluetooth Manager will only be able to
restore connections with the Z-Max units that are present
in the vicinity and powered up at that time.
You will then simply be asked to re-enter the PIN
number
for each of these units.
Before moving on to FAST Survey, do the following:.
2. Tap OK in the upper-right corner to close the Bluetooth
Manager window. This does not turn off Bluetooth
Manager but simply frees the screen for other tasks.
3. For the same reason, close the Control Panel window.
Note the presence of the Bluetooth icon ( ) in the task
bar meaning that Bluetooth continues to be active.