User's Manual

25
English
5. Enter the antenna height you measured previously (see
point
5. page 15) as well as the method you used for this
measurement. If you used the method described on
page 15, check Slant.
6. Select the type of GPS antenna used, i.e. “[Z-Max GPS]
Thales Navigation” as you are using the Z-Max.Net
antenna directly connected to the receiver.
7. Tap on the Ports tab. With Bluetooth and the Thales radio
used, make the following choices:
• Type: “THL” (Thales Radio)
• Data Port: “C” (Bluetooth connection to field
terminal)
• Radio Port: “B”
• Message Type: “Ashtech CPD”.
8. Tap OK to send these parameters to the Z-Max.Net
receiver. Re-enter the PIN number. The Z-Max.Net emits
a beep. A new menu appears asking you to enter the
initialization position for the base.
Entering the Base Position and ID
Up to six different options are possible to enter this
position: