User's Manual

31
English
- Type: “NTRIP”
- Data Port: “C”
5. Tap the Add button located at the bottom of the screen.
6. Enter the properties of the GPRS provider. The screen
opposite only gives examples of what these properties
might be.
By appropriately naming this set of information (Name
field on top), you will be able to directly select this
configuration from the
Base Config field on the previous
screen.
7. Tap the NTRIP Settings button and enter the properties of
the NTRIP service you want to use. The screen opposite
only gives examples of what these properties might be.
8. Tap OK three times.
9. The message “Connecting to Receiver” is displayed and a
beep is then emitted indicating that the Z-Max.Net is
being configured.
A new screen appears on which you can see the current
status of the com module’s modem (READY; see screen
opposite).
10. Tap Connect. The Connecting to Caster message is
displayed. Then a new screen appears from which you
can see all the stations available from your NTRIP
provider
11. From the drop-down list associated with the Mount Point
field, select the base station you would like to work with.
The rest of the screen provides information on the
selected station. The
Format field is automatically preset
following the selection of a station but you can still
change it if the pre-setting is incorrect (see screen
opposite).