User's Manual

46
English
The left side of the Download window then lists the
files present on the SD card.
- Select the files you want to download. If necessary,
hold down the Ctrl key to make a multiple selection.
-Press the F5 key. A
Copying file dialog appears during
data transfer.
After the transfer is complete, notice in the right side
of the Download window that each downloaded file
has been split into different files named with a prefix
as explained opposite.
- Close the Download window.
3. Repeat the previous two steps for each of the Z-Max.Net
units involved in the project to download their respective
files to the same project folder on your office computer.
Post-Processing Field Data
1. On your office computer, launch GNSS Solutions
2. Click Create a New Project, enter a project name and then
click
OK.
3. Click Import Raw Data from Files.
4. Browse your computer to change to the folder containing
the data files you have just downloaded.
5. Select the files you want to import and click Open.
Files resulting from the
downloading of an
observation file are
named as follows:
X<Downloadedfilename>
where prefix X = “E” for
Ephemeris Data, “B” for
Position Data, “D” for
GPS Raw Data and “W”
for SBAS Data.