User's Manual

English
50
it as the system used in the current job. This will take you
back to the coordinate system selection screen on which
you will now be able to see how the new USER coordinate
system has been defined (new projection and datum
names displayed in the second and third fields
respectively).
Viewing the Properties of the Coordinate System Used in a
Job
•Tap Menu>Job>Properties.
• Tap on the Coordinate System... tab. The screen now shows
the non-editable settings for the coordinate system used
in the map. Tap on the Properties button to read the details
of the datum and projection used in the coordinate
system.
Voice Setting For best quality voice recording, you need to change the
default voice sampling setting as follows:
• Tap Start, Notes
• If this action directly opens a note file, please close it
before proceeding.
•Tap Menu>Options.
• Tap on the Global Input Options hyperlink.
• Tap on the Options tab.
• Select “44,100 Hz, 16 Bit, Mono (86 KB/s)” from the
Voice recording format drop-down list.
•Tap OK to enter the new setting.
•Tap OK then to return to the Start screen.