User's Manual
Table Of Contents
- What is MobileMapper 100?
- First-Time Use
- Unpacking
- Charging the Battery for the First Time
- Inserting the Battery Into the Receiver
- Turning the Receiver On
- Adjusting Backlight Level
- Setting Backlight Idle Time
- Power Management
- Regional Settings
- Locking the Screen and the Keypad
- How to Hold the Receiver
- Switching to Suspend Mode
- Turning the Receiver Off
- System Description
- Special Features
- Using MobileMapper Field Software
- Post-Processing Option and MobileMapper Office
- GNSS Toolbox
- Installing Geoids
- Platform Specifications
English
68
Installing Geoids
Ashtech makes available a collection of geoids for use in
many countries around the world. This collection is hosted on
the Ashtech website and is regularly updated.
To download a geoid, use the Geoids (models & tools) option in
the welcome menu of the MobileMapper Software CD
delivered with the receiver.
In absence of the CD, you can still list and download the
available geoids using your web browser to connect to the
following URL: http://resources.ashtech.com/GEOIDS
.
After a new geoid has been downloaded to your computer,
MobileMapper Office will automatically prompt you to install
the new geoid on your receiver.
This step may be run right after downloading the geoid to the
computer if the receiver is currently connected to the
computer via ActiveSync and the docking station, or later, as
soon as you connect the receiver to the computer. In both
cases, please accept.
(Still under construction. Web page listing geoids no longer
accessible at the time of writing - July 28)