User's Manual

English
8
Receiver Description
Front View Power Key
Use the Power key [1] to turn on or off the receiver.
To turn on the receiver, press the Power key [1] until you can
feel a vibration in your hand, meaning the receiver has started
a power-on procedure. You can then release the key.
To turn off the receiver press the Power key [1] until a sound
is heard and a warning message pops up on the screen asking
you to confirm the power shutdown request. Tap Yes on the
screen. A two-tone sound can then be heard just before the
receiver shuts down.
Windows key
The Windows key [2] is used to give immediate and
unconditional access to the Windows Start menu.
Display Screen
The display screen [3] is a 3.5-inch, QVGA, 256-color (18-bit
RGB) touch screen (240 x 320 pixels).
Scroll / Enter keys
The Enter button [4] is used to accept highlighted input and
initiate various functions.
The Scroll button [5] is the ring around the Enter button. It
is used to move the cursor on the screen, from one data field
to the next on a parameter screen, from one option to another
in a menu, from one geographical location to another on a
map screen.
Function keys
The receiver is fitted with four function keys [6]. The specific
function of each of them is given in the table below.
[8]
[3]
[9]
[1] [7] [4] [5] [2] [6]
Button Function
The keypad includes two of these buttons, one on the right, the other
on the left.
Each of them is a convenient alternative to tapping on the functions
appearing just above in the task bar at the bottom of the screen (e.g.
Notifications, Contacts, Menu, Log, etc.).
Use this button to enlarge the map displayed on the screen (zoom in).
Use this button to reduce the map displayed on the screen (zoom out).