User's Manual
Table Of Contents
- 12.Users manual-未完.pdf
- 111.pdf
- First-Time Use
- Unpacking
- Inserting the Battery Into the Receiver
- Turning the Receiver On
- Using the AC Adapter to Charge the Battery
- Adjusting Backlight Level and Idle Time
- Power Management
- Setting Time & Date
- Regional Settings
- Locking the Screen and the Keypad
- How to Hold the Receiver
- Using the Quick Toolbar
- Switching the Receiver Manually to Suspend Mode
- Turning the Receiver Off
- Receiver Description
- GNSS Toolbox
- Advanced Features
- Platform Specifications
- First-Time Use
- 15.19; 15.21; 15.105
- 111.pdf
- 15.19; 15.21; 15.105
English
1
First-Time Use
Unpacking Open the receiver box and unpack the following items:
• Receiver
• Battery
• Universal AC adapter
•USB cable
• Back strap
•Lanyard
•Stylus
Inserting the
Battery Into the
Receiver
Follow the instructions below:
• Turn over the receiver.
• Using a coin, rotate the two screws to open the trap door:
turn the left-hand one clockwise by a quarter turn, and the
right-hand one anticlockwise, also by a quarter turn.
• Pull the trap door open.
• Insert the battery as shown. Orientate the battery so that
its electric contacts can come into contact with those in
the battery compartment. Insert the upper part of the
battery first, as shown, then push the battery in.
• Put the trap door back into place by first inserting the two
lugs located at the bottom of the trap door.