User's Manual
23
E-Compass Calibration
• PressontheWindowskey .
• ScrolldownuntilyouseetheCompassicon.
• TapontheCompassicontoopentheCompassutility.
• TapontheCalibrationtab.
• Putthereceiverdownonatabletogiveitahorizontalposition(see
picture[1]below).
• Tap on the Start button located in the task bar to start the
calibrationprocess.
Firsthorizontalcalibrationisreadytogo.
• Slowly rotate the receiver by a couple of turns while keeping it
horizontal(seepicture[1]below).
Waituntilthereceiver indicatesthathorizontalcalibrationis
complete and prompts you to start vertical calibration
( “Ready” displayed underneath the Vertical calibration
button).
• Take the receiver in your hands (see picture [2] below), put it in
vertical position then slowly rotate it by a couple of turns, in the
verticalplane.Thengentlyputitbackdownonthetable.
• Waituntilcalibrationiscompletebeforeproceeding.
Platform Specifications