User's Manual

11 ADL Vantage/ADL Vantage Pro/ADL Vantage 35
Configuring the Radios
ADLCONF configuration software
ADLCONF is the software application for configuring and troubleshooting all Advanced
Data Link (ADL) radios. Running the ADLCONF software on a computer attached
through a serial cable to an ADL radio enables you to check the status of the radio, enter
receive-only channel tables, and set radio parameters such as channel bandwidth and
output power. Channel tables for transmission of data must be obtained from authorized
Pacific Crest dealers. If your radio did not come with a channel table already installed, you
can obtain one from your dealer and then import it using the ADLCONF software.
The latest version is available for free download from
www.PacificCrest.com. The
ADLCONF User Guide is also available on the Pacific Crest website. A user guide that
describes how to configure the ADL Vantage radio is available by running the ADLCONF
software and then selecting Help / User Guide.
Factory default settings
To return the radio to its factory default configuration, use the ADLCONF software. Click
Restore Factory to the right of the screen and then click Program. The following table
shows the factory default settings:
Description Default Setting
Device Status Battery status
Chanel/Frequency Channel 01 and frequency (MHz)
Channel Tx Frequency Channel No. and frequency (MHz)
Data Protocol Transparent EOT (End of Transmission)
Radio Link Rate 9600
Operation Mode (Trimble protocol) Base/Rover
Sensitivity High (Rover)
Rx LED Meaning Signal Received
Serial Baud 38000
Advanced Menus Hide
CSMA On
Security Code Off
Edit Configuration Enabled
Scrambling On
Forward Error Correction On
Language Select (ADL Vantage Pro only
and ADL Vantage 35)
English