User's Manual

22 ADL Vantage/ADL Vantage Pro/ADL Vantage 35
Function Description Parameter choices
Transmit Power Displays / selects transmitter power
level
Low power
Low intermediate power
Intermediate power
High intermediate power
High power
Rx LED Meaning Displays/selects what it means when
the Rx LED flashes
Signal received
Data received
Serial Baud Displays/selects serial baud rate of the
radio’s data port
2400
4800
9600
19200
38400
115200
Signal Strength Displays strength of the received
signal (RSSI) in dBm
High: RSSI > -90 dBm
Med: -90 > RSSI >-110 dBm
Low: -110 > RSSI > -150 dBm
Press the
Enter button
Advanced Menus Displays or conceals rarely used menus Hide
Show
CSMA Displays/selects Carrier Sense Multiple
Access Settings
On
Off
Security Code Encrypts/Decrypts transmitted data
(Not displayed if a Trimble protocol
is selected or if no code has been
programmed into the radio.)
Off
On
Edit Configuration Enables/Disables configuration using
the radio interface
Enabled
Disabled
Scrambling Fills dead air with non-zero bits
(Not displayed if a Trimble protocol is
selected.)
On
Off
FEC Turns Forward Error Corrections on/off
(Not displayed if a Trimble protocol is
selected.)
On
Off
Previous Error Displays current error status No Error
Language Select
(ADL Vantage Pro
only)
Selects the display language English
Chinese
Russian
Antenna Detection Reduces TX power to 2W if antenna
reflects too much energy back into the
radio at first transmission
Enabled
Disabled
For the field-configurable functions, the available choices are displayed on the bottom
row of the LCD. The currently selected parameter is marked with an asterisk. To select a
different choice for the displayed function, scroll up or down with the arrow buttons and
press Enter when the required choice is displayed.