User's Manual

31 ADL Vantage/ADL Vantage Pro/ADL Vantage 35
Technical Specifications
General Specifications
Communication 1 RS-232 port, 115.2 kbps maximum
User Interface 2-row, 16-character LCD display with five navigation buttons
Power
Input Power ADL Vantage: 9.0 VDC – 30.0 VDC, 2 amp maximum
ADL Vantage Pro: 10.0 VDC – 30.0 VDC, 15 amp maximum
ADL Vantage 35: 11.0 VDC – 16.0 VDC, 15 amp maximum
Warning - Supplying more than the specified current can
damage the radio.
Power Consumption (Rx)
ADL Vantage:0.6 W nominal @ 12.0 VDC
ADL Vantage Pro and ADL Vantage 35: 0.7 W nominal @ 12.0 VDC
with LCD backlight off; 1.7 W with LCD backlight on
Power Consumption (Tx) ADL Vantage:
- 13.4 W nominal @ 12.0 VDC, 4 W RF output
- 7 W nominal @ 12.0 VDC, 1 W RF output
ADL Vantage Pro:
- 130 Watts nominal @ 12.0 VDC, 35 W RF output
- 55 Watts nominal @ 12.0 VDC, 8 W RF output
- 32 Watts nominal @ 12.0 VDC, 2 W RF output
ADL Vantage 35:
- 115 Watts nominal @ 12.0 VDC, 35 W RF output
- 45 Watts nominal @ 12.0 VDC, 8 W RF output
- 25 Watts nominal @ 12.0 VDC, 2 W RF output
Modem Specifications
Modulation/Link Rates
GMSK: 4800, 8000, 9600, 16000 (not supported in USA), 19,200 bps
4FSK: 9600, 19,200 bps
Link Protocols Transparent FST/EOT/EOC, Packet-switched, South, Stonex Type 1,
TRIMTALK
™
, TRIMMARK
™
, TT450S (HW), SATEL
®
Forward Error Correction Yes
Radio Specifications
Frequency Bands 390 MHz to 430 MHz, 430 MHz to 470 MHz (ADL Vantage) and
430-473 MHz (ADL Vantage Pro and ADL Vantage 35)
Frequency Control Synthesized 6.25 kHz tuning resolution
Frequency stability: ±1 PPM -40 ˚C to +85 ˚C
Channel Bandwidth 12.5 kHz and 25 kHz, software derived
RF Transmitter Output Programmable to 2 to 35 Watts (where permitted, depending
on model)
Sensitivity –110 dBm BER 10
5
Type Certification All models are type accepted and certified for operation in the U.S.,
Europe, Australia, New Zealand, and Canada.