User's Manual

2. The Welcome Wizard will lead you through the setup process.

3. Select your preferred language by using the + or - (shown as UP

or DOWN on the Wizard) buttons on the left side of the device,

then press the ACTION (shown as ENTER on the Wizard) button

to choose the language (the touchscreen is not enabled in the

Wizard).

4. Use the + button to highlight the box next to Yes, I want to use

<language > as the language on the device.

a. Press the ACTION (ENTER) button to check the box.

b. Press the - (DOWN) button 2 times to highlight the Next >

box.

c. Press the ACTION (ENTER) button to select Next >.

Wait while your device is being configured for the

language you selected.

WARNING: The only way to change the language you have

selected is to re-install the firmware using the Firmware update

utility.

NOTE: Only Microsoft applications and messages will be

translated into languages other than English. All other error

messages, notifications and other applications may appear in

English.

5. Tap the screen to set up your device with a Security PIN

(optional).

6. See Chapter 3 for instructions on setting the date and time on