User's Manual

Juno T41/5
User Manual
47
your device searches for Bluetooth devices.
3. Tap the name of the other Bluetooth device and tap Next. For
enhanced security, use passcodes. Enter the same passcode on
the other device.
4. Under Advanced, you can change the name of the other device
and add additional services, if available. Tap Save.
Creating a Bluetooth connection with a PC:
1. Ensure that your PC has connectivity software installed and has
Bluetooth hardware.
2. Set up a partnership between your device and the PC. Refer to
your PC documentation for instructions.
3. Once shown, select the PC from the Device list and tap Next.
4. Enter the passcode, if necessary and tap Next.
5. Confirm that ActiveSync service is available and place a check in
the check box and tap Finish.
6. Tap > ActiveSync > Menu > Connect via Bluetooth.
Bluetooth-enabled headphone: You can use Bluetooth stereo headphones
(A2DP) or a Bluetooth headset (HFP/HSP). Any Bluetooth audio device
supporting the A2DP, HFP, or HSP profiles should be compatible. Many
Bluetooth headphones do not require a passcode to pair with your device.
Troubleshooting Bluetooth connection problems: If your device cannot
find another Bluetooth device, confirm that the device is within range (less
than 30 feet / 10 meters) and no large objects obstruct the path of other
Bluetooth-enabled devices. Confirm that the device is turned on and has
been configured to be discoverable.
6.5 Working with Wi-Fi
If your device comes with built-in Wi-Fi capability, you can wirelessly
transmit data to and from your device by connecting to available access
points or hot spots. To find out if you have Wi-Fi installed in your device,
tap
> Settings > System > System Information > Wireless.
The Wi-Fi is off by default; however the on/off state will persist after a
reset. To turn the Wi-Fi on or off, do one of the following procedures: