User's Manual
Table Of Contents
- Safety Information
- About this user guide
- 1 About the Trimble Juno T41 handheld
- 2 Using the phone
- 3 Using the operating system
- The main screens
- Interacting with the handheld, opening applications
- Changing button assignments
- Battery status indicators
- Speaker and network status indicators
- Pre-installed programs
- Changing screen settings
- Using the on-screen keyboard
- Writing or drawing on the screen
- Making a recording
- Sounds and notifications
- Adjusting the display and keypad brightness
- Using the flashlight
- Calibrating the compass
- Installing applications onto the handheld
- Storing data
- Working with files
- Working with Task Manager
- Using Battery Logger
- Using E-mail
- 4 Connecting and syncing to an office computer
- 5 Using the integrated radios
- Choosing a connection method
- Turning on and turning off the integrated radios
- Using the Wireless Manager
- Connecting to a Wi-Fi access point
- Using the Summit utility
- Turning on and turning off the Bluetooth radio from within the Bluetooth appl...
- Making the handheld visible (discoverable) to other Bluetooth devices
- Connecting to a Bluetooth-enabled device
- Accessing a corporate network
- 6 Using the GNSS receiver
- 7 Using the camera
- 8 Using the barcode imager
- 9 Using the UHF RFID scanner
2 Using the phone
For information on connecting to a cellular network to access the Internet or a company network,
see Connecting to a cellular network from the modem, page 1.
Manually connecting to a cellular network from the
modem
Use the integrated cellular modem in the Juno T41 handheld to connect to a cellular network and
access the Internet or a company network. Use this type of connection to access a background map
server, or for Internet and e-mail access.
Before you begin the steps below, make sure that:
l a SIMis inserted and the cellular network is configured (see Configuring the cellular connection
on a GSM network, page 1 or Configuring the cellular connection on a CDMA network, page 1.
l the modem can access the Internet directly. If necessary, contact your service provicer and
confirm whether you must enter a user name, password, and domain details when connecting.
l make sure that you have the correct APN (Access Point Name) from your cellular provider.
Some applications automatically launch the connection when you start the application, if a current
connection is not already established. To manually connect:
1.
Tap /Settings /Connections/Wireless Manager. If the modem is Off, tap Phone to turn it
on. Close the Wireless Manager.
2.
Tap /Settings /Connections / Connections.
3. Under Tasks, tap Manage existing connections. The configured connections are listed.
4. Tap and hold the connection that you want to use. Tap Connect from the pop-up menu.
5. The task bar shows the “connecting” icon. When the connection is open/established, the task
bar shows the “connected” icon. The icons shown depend on the network—see Speaker and
network status indicators, page 38 for full details.
Once connected, open an application, for example, Internet Explorer, to test the connection.
Trimble Juno T41 User Guide 32