User's Manual
Table Of Contents
- Safety Information
- About this user guide
- 1 About the Trimble Juno T41 handheld
- 2 Using the phone
- 3 Using the operating system
- The main screens
- Interacting with the handheld, opening applications
- Changing button assignments
- Battery status indicators
- Speaker and network status indicators
- Pre-installed programs
- Changing screen settings
- Using the on-screen keyboard
- Writing or drawing on the screen
- Making a recording
- Sounds and notifications
- Adjusting the display and keypad brightness
- Using the flashlight
- Calibrating the compass
- Installing applications onto the handheld
- Storing data
- Working with files
- Working with Task Manager
- Using Battery Logger
- Using E-mail
- 4 Connecting and syncing to an office computer
- 5 Using the integrated radios
- Choosing a connection method
- Turning on and turning off the integrated radios
- Using the Wireless Manager
- Connecting to a Wi-Fi access point
- Using the Summit utility
- Turning on and turning off the Bluetooth radio from within the Bluetooth appl...
- Making the handheld visible (discoverable) to other Bluetooth devices
- Connecting to a Bluetooth-enabled device
- Accessing a corporate network
- 6 Using the GNSS receiver
- 7 Using the camera
- 8 Using the barcode imager
- 9 Using the UHF RFID scanner
3 Using the operating system
Action Definition
the width of the screen.
Pinch In some applications (such as Browser and Gallery), place two fingers on the screen at
once and pinch them together to zoom out or spread them apart to zoom in.
Entering information
Depending on the program or application you are using, you can enter information in several ways,
as described below:
Input method Description
Synchronizing Connect the handheld to an office computer to exchange information between
the handheld and the office computer.
For more information, see Connecting and syncing to an office computer, page
58.
Writing
Use your finger or a stylus like a pen to write directly on the screen.
Typing Use the keyboard input panel to enter typed text by tapping keys on the on-
screen keyboard.
Recording
Create a recording.
Using the Home screen and the Start menu
You can open applications from the Home screen or the Start menu. All applications installed on the
handheld are accessible from the Start menu.
To open an application, tap it.
If at any time the touch screen does not respond correctly to stylus taps or your finger, realign it.
For more information, see Aligning the screen, page 21.
Changing button assignments
If required, you can assign a customized action to the left and right programmable buttons, such as:
l Run a selected application, for example Messaging or Calendar.
l Act as a software button, for example an OK/Close button or a scroll button.
To assign a custom action to a button:
Trimble Juno T41 User Guide 37