User's Manual
Table Of Contents
- Safety Information
- About this user guide
- 1 About the Trimble Juno T41 handheld
- 2 Using the phone
- 3 Using the operating system
- The main screens
- Interacting with the handheld, opening applications
- Changing button assignments
- Battery status indicators
- Speaker and network status indicators
- Pre-installed programs
- Changing screen settings
- Using the on-screen keyboard
- Writing or drawing on the screen
- Making a recording
- Sounds and notifications
- Adjusting the display and keypad brightness
- Using the flashlight
- Calibrating the compass
- Installing applications onto the handheld
- Storing data
- Working with files
- Working with Task Manager
- Using Battery Logger
- Using E-mail
- 4 Connecting and syncing to an office computer
- 5 Using the integrated radios
- Choosing a connection method
- Turning on and turning off the integrated radios
- Using the Wireless Manager
- Connecting to a Wi-Fi access point
- Using the Summit utility
- Turning on and turning off the Bluetooth radio from within the Bluetooth appl...
- Making the handheld visible (discoverable) to other Bluetooth devices
- Connecting to a Bluetooth-enabled device
- Accessing a corporate network
- 6 Using the GNSS receiver
- 7 Using the camera
- 8 Using the barcode imager
- 9 Using the UHF RFID scanner
3 Using the operating system
1.
Tap /Settings/Personal / Buttons.
2. Specify an action for a button:
a. Tap the Program Buttons tab. The list of assignable buttons is shown on the left hand
side, with the program that is assigned by default on the right.
b. Tap a button in the list to select it.
c. From the Assign a program drop-down list, select the action you want to occur when you
press the button or tap the soft key.
d. Tap OK.
3. Tap OK.
Battery status indicators
The battery charging icon in the Title bar at the top of the screen shows one of the following icons to
denote the battery charge status:
Icon Description Icon Description
Battery has full charge Battery has high charge
Battery has medium charge Battery has low charge
Battery has very low charge (20% or
less)
Battery charging/using external power
Battery communication error Battery out of temperature range
warning
Speaker and network status indicators
Status indicators that appear in the title bar at the top of the screen are as described below.
Speaker status indicator
The speaker status icon on the title bar shows the status of the speaker. Tap the title bar and then
on the pull-down list tap the speaker icon to adjust the volume and to turn the speaker on or off.
Trimble Juno T41 User Guide 38