User's Manual
Table Of Contents
- Safety Information
- About this user guide
- 1 About the Trimble Juno T41 handheld
- 2 Using the phone
- 3 Using the operating system
- The main screens
- Interacting with the handheld, opening applications
- Changing button assignments
- Battery status indicators
- Speaker and network status indicators
- Pre-installed programs
- Changing screen settings
- Using the on-screen keyboard
- Writing or drawing on the screen
- Making a recording
- Sounds and notifications
- Adjusting the display and keypad brightness
- Using the flashlight
- Calibrating the compass
- Installing applications onto the handheld
- Storing data
- Working with files
- Working with Task Manager
- Using Battery Logger
- Using E-mail
- 4 Connecting and syncing to an office computer
- 5 Using the integrated radios
- Choosing a connection method
- Turning on and turning off the integrated radios
- Using the Wireless Manager
- Connecting to a Wi-Fi access point
- Using the Summit utility
- Turning on and turning off the Bluetooth radio from within the Bluetooth appl...
- Making the handheld visible (discoverable) to other Bluetooth devices
- Connecting to a Bluetooth-enabled device
- Accessing a corporate network
- 6 Using the GNSS receiver
- 7 Using the camera
- 8 Using the barcode imager
- 9 Using the UHF RFID scanner
3 Using the operating system
To enable ClearType:
1. Tap the ClearType tab and then select the Enable ClearType check box.
2. Tap OK.
To change the size of text on screen:
1. Tap the Text Size tab.
2. Tap and drag the slider control to the left to make text smaller, or to the right to make text
larger.
3. The example text below the slider shows how the text will appear on screen.
4. Tap OK.
Using the on-screen keyboard
The Soft Input Panel (S.I.P.) is a special on-screen keyboard for devices which do not have standard
keyboards. The Juno T41 handheld includes a custom S.I.P. application called Resco Keyboard Pro.
To configure it, tap / Resco Keyboard Pro.
Resco Keyboard Pro enables you to customize the handheld for fast insertion of frequently used
phrases, and to customize various features including haptic or audio feedback, basic or advanced
gestures and more. Resco Keyboard Pro supports 39 languages.
The keyboard icon automatically appears in the tile bar of any application requiring text or
numeric input.
To display the keyboard, tap , or tap a text box in the application.
To enter characters, use the stylus to tap the keys on the keyboard.
When you finish entering text in a field, tap to accept the text you have entered and then
move to the next field.
To enter upper case characters, tap the Shift key before tapping the letter you want, or
tap the CAP key to type multiple capital letters.
To enter numbers and symbols, tap to display a keyboards containing numbers and other
symbols. To switch back to the main keyboard, tap again.
To hide the keyboard, tap again.
To change the size of the keypad, see Changing screen settings, page 45.
Trimble Juno T41 User Guide 46