User's Manual

3 Using the operating system
Editing text
If you need to edit text, tap on the screen to place the insertion point where you need it.
You can select text, and cut, copy, and paste text.
l To select text, double-tap the display at the point you want to select a word, or tap and hold
then tap Select All to select all text.
l To cut or copy text, select the required text, then tap and hold, then select Cut or Copy.
l To paste text, tap the required insertion point, then tap and hold, then select Paste to insert
the last text that you cut or copied. To replace text, select it before tapping Paste.
Using Auto-suggestion
The device uses the active dictionary to make word suggestions as you type. When the device
suggests a word, tap the suggestion if you want to accept it. If the word you want to type is not
displayed, you must type the whole word.
Writing or drawing on the screen
In some applications, for example, Notes, you can draw or write directly on the screen using the
stylus.
1.
Tap and then tap Notes .
2.
Open a note, tap Menu and select Draw.
3. Use the stylus to write or draw on the screen.
Making a recording
The device comes with an integrated speaker and a microphone. It also has an audio jack that is
wired for a headset with a mono speaker and microphone combination. It is not for stereo
headsets.
With the integrated microphone, you can create a stand-alone voice note or you can add a
recording to a note. Then you can work with voice notes in the same way that you work with notes.
To make a recording:
1.
Tap and then tap Notes .
2.
Tap Menu and select View Recording Toolbar.
Trimble Juno T41 User Guide 47