User's Manual
Table Of Contents
- Safety Information
- About this user guide
- 1 About the Trimble Juno T41 handheld
- 2 Using the phone
- 3 Using the operating system
- The main screens
- Interacting with the handheld, opening applications
- Changing button assignments
- Battery status indicators
- Speaker and network status indicators
- Pre-installed programs
- Changing screen settings
- Using the on-screen keyboard
- Writing or drawing on the screen
- Making a recording
- Sounds and notifications
- Adjusting the display and keypad brightness
- Using the flashlight
- Calibrating the compass
- Installing applications onto the handheld
- Storing data
- Working with files
- Working with Task Manager
- Using Battery Logger
- Using E-mail
- 4 Connecting and syncing to an office computer
- 5 Using the integrated radios
- Choosing a connection method
- Turning on and turning off the integrated radios
- Using the Wireless Manager
- Connecting to a Wi-Fi access point
- Using the Summit utility
- Turning on and turning off the Bluetooth radio from within the Bluetooth appl...
- Making the handheld visible (discoverable) to other Bluetooth devices
- Connecting to a Bluetooth-enabled device
- Accessing a corporate network
- 6 Using the GNSS receiver
- 7 Using the camera
- 8 Using the barcode imager
- 9 Using the UHF RFID scanner
3 Using the operating system
starting position.
6. Repeat as necessary if the calibration fails.
Installing applications onto the handheld
Before you begin, refer to the installation instructions provided with the software.
Some software installations are specifically designed to run on a Windows Embedded Handheld
device. To install software on a Windows Embedded Handheld device:
1. Connect the handheld device to a computer (see Connecting and syncing to an office
computer, page 58).
2. Copy the installation files to a folder on the handheld device.
3. Browse to the folder on the handheld device. Tap the installation setup file to run it, or tap and
hold the file and then select Run.
4. If prompted after installation, restart the handheld device.
To install software that is provided as an installation setup that runs on an office computer, either
from a CD or that you have downloaded:
1. Connect the handheld device to a computer (see Connecting and syncing to an office
computer, page 58).
2. If the software is provided on a CD, insert the software CD into the office computer. Otherwise,
download the software onto the office computer.
3. Run the installation setup.
4.
If prompted, select the install option for a Windows Embedded Handheld. Once the software is
installed on the computer, it is automatically transferred to the handheld device.
Note – If a memory card is inserted in the handheld device, the card appears as an installation location
option. Trimble recommends that you install software to the handheld device’s storage memory, not to a
memory card. If you install software to a card and then remove the card from the handheld device, the
software will not be available for use.
5. If prompted after installation, restart the handheld device.
Storing data
The handheld has several types of memory available:
l Program memory is similar to the RAM in a computer, and is used for running apps. You
cannot use it to save data.
l Internal storage is used for storing applications and private app data.
Trimble Juno T41 User Guide 50